|
|
12-16-2020, 10:21 AM
|
#3 |
|
Junior Member
Join Date: Jul 2016
Posts: 63
Likes: 30
Liked 52 Times in 22 Posts
|
Re: Balancing Weld Pro Stars?
I made an aluminum hub that centers on the wheel balancers arbor. The hub is drilled and tapped for wheel studs. The wheel is mounted to the hub with the proper lug nuts. This works well but there needs to be a good fit between the arbor and the center hole in the hub.
|
|
|
|
|
Threaded Mode