Moving from bracket to Stock Eliminator - Page 5

F677 · 07-28-2021, 07:31 AM

Quote:

Originally Posted by 1347

I am wondering why you think the 302 combo would be a better combo to work with?

You can only run the Holley carb if you run the car as a Mercury in GT super stock.

Just read the 68 spec. You are right. 4300 either way in stock. Thanks for the heads up. I'm learning.....

Larry Hill · 07-28-2021, 08:01 AM

Billy the AHFS are rules we get to play by, I understand how some parts work. Looking forward to the conversation, I’m sure it will go into the night.

Carguy49 · 08-25-2021, 12:43 PM

I got a chance to meet Devin in person at Pacific Raceways last weekend. Great guy with a very good attitude about running Stock. Asking many questions and listening to all the answers. Has talked to the right Ford guys locally. Knows what he wants to accomplish and will get there with time and the right help.

I believe Devin will do well and wish him the best of luck in Stock Eliminator.

Jim Caughlin · 08-25-2021, 01:00 PM

Quote:

Originally Posted by 1347

Devin,
You may be better off running that car in super stock with that engine, you can run the replacement aluminum head, and it will be fine with a 9" tire and a caltrac. Whether you run stock or super stock, Vern Buchanan would be the person to talk to about doing the carb.
Good luck with the project

The alum head deal looks good from the HP rating standpoint but what sucks is what is needed to make them SS legal. They come from the factory with too large of valves which means you have to remove all 16 seats and weld them up to match the smaller seat diameters, lots of money involved with the changes to make them legal. I am building a '64 Comet for SS (almost finished) and stayed with the iron heads for budget reasons.

Jim Caughlin
SS6019

FireSale · 08-25-2021, 01:51 PM

When I broke into racing I built a 68 302 for SS/GT using the AFR 1399 aluminum heads that are listed as legal in the book. It would cost a lot of cash to get the right size valves in those heads and there are only a few machine shops that will take the job on. I sold mine to Brian Thompson and run iron heads in bracket. Don't make that mistake.
On the subject of your combo being competitive heads up, take that with a grain of salt. Class racing is rather thin these days with the exception of a few big National events. Running under the index will move you up the ladder, but for the most part it's a bracket race of very nice cars. Just be reminded that you can't dial over your class index. A 12.99 index car can't dial 13.00.
Find Thompson, Seaburg and Biscay at Bremerton or Pacific. The best Ford builders and tuners around. Biscay is a Chevy/Bike guy, but he's fun.
Pacific Raceway: Bracket Kings This Friday-Saturday (money race)
Woodburn Raceway: D6 Bracket Finals first weekend in September.
I'll be around but my car is out for the season. Red 68 with white Shelby stripes and a real pissy oil leak.

BRETV · 08-25-2021, 02:27 PM

Built a SS/LA a couple years ago and contemplated the aluminum head but the cost and work to make them legal didn't make sense. We ran the cast iron.

Bret Velde
2003 ??/SA

07-28-2021, 08:01 AM	#42
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,640 Likes: 1,940 Liked 10,714 Times in 2,230 Posts	Re: Moving from bracket to Stock Eliminator Billy the AHFS are rules we get to play by, I understand how some parts work. Looking forward to the conversation, I’m sure it will go into the night. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

08-25-2021, 12:43 PM	#43
Carguy49 VIP Member Join Date: Aug 2011 Location: Fife, Washington Posts: 1,979 Likes: 2,474 Liked 2,949 Times in 709 Posts	Re: Moving from bracket to Stock Eliminator I got a chance to meet Devin in person at Pacific Raceways last weekend. Great guy with a very good attitude about running Stock. Asking many questions and listening to all the answers. Has talked to the right Ford guys locally. Knows what he wants to accomplish and will get there with time and the right help. I believe Devin will do well and wish him the best of luck in Stock Eliminator. __________________ Ron McDowell - Did Race Every day is a Gift - Enjoy with family and friends.

08-25-2021, 01:51 PM	#45
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Moving from bracket to Stock Eliminator When I broke into racing I built a 68 302 for SS/GT using the AFR 1399 aluminum heads that are listed as legal in the book. It would cost a lot of cash to get the right size valves in those heads and there are only a few machine shops that will take the job on. I sold mine to Brian Thompson and run iron heads in bracket. Don't make that mistake. On the subject of your combo being competitive heads up, take that with a grain of salt. Class racing is rather thin these days with the exception of a few big National events. Running under the index will move you up the ladder, but for the most part it's a bracket race of very nice cars. Just be reminded that you can't dial over your class index. A 12.99 index car can't dial 13.00. Find Thompson, Seaburg and Biscay at Bremerton or Pacific. The best Ford builders and tuners around. Biscay is a Chevy/Bike guy, but he's fun. Pacific Raceway: Bracket Kings This Friday-Saturday (money race) Woodburn Raceway: D6 Bracket Finals first weekend in September. I'll be around but my car is out for the season. Red 68 with white Shelby stripes and a real pissy oil leak. __________________ Dale Shearon 68 Mustang 6394

08-25-2021, 02:27 PM	#46
BRETV Senior Member Join Date: Oct 2003 Posts: 567 Likes: 4,175 Liked 776 Times in 199 Posts	Re: Moving from bracket to Stock Eliminator Built a SS/LA a couple years ago and contemplated the aluminum head but the cost and work to make them legal didn't make sense. We ran the cast iron. Bret Velde 2003 ??/SA