Random tech questions

[Rose Racing]

Yes car came with bench which was removed for roll bar installation and the bench is sitting out behind garage(its been 2 years) I have no idea what to do with it and was going to use the Jegs recommended aluminum seat installation kit https://www.jegs.com/i/JEGS/555/702266K/10002/-1 as well as something like this https://www.moroso.com/seat-back-bra...a-tubingc4905/

[FireSale]

Wow. Just a covered aluminum seat is $265 and you need two matching ones for Stock.
Here are some Kirkey prices from Summit.

Kirkey 16 Series cover 125 each

Kirkey 16 Series seat 150 each
Kirkey brackets 54 or 70 per pair
Kirkey back brace 45 each
With the extra cost of the harness, I guess it's a wash...

[Dave Gantz]

Originally Posted by FireSale

Wow. Just a covered aluminum seat is $265 and you need two matching ones for Stock.
Here are some Kirkey prices from Summit.

Kirkey 16 Series cover 125 each

Kirkey 16 Series seat 150 each
Kirkey brackets 54 or 70 per pair
Kirkey back brace 45 each
With the extra cost of the harness, I guess it's a wash...

And I wouldn't be surprised if NHRA required them to be replaced every 2 years.

[Henrys Toy]

Originally Posted by Rose Racing

Yes car came with bench which was removed for roll bar installation and the bench is sitting out behind garage(its been 2 years) I have no idea what to do with it and was going to use the Jegs recommended aluminum seat installation kit https://www.jegs.com/i/JEGS/555/702266K/10002/-1 as well as something like this https://www.moroso.com/seat-back-bra...a-tubingc4905/

Good morning,
It cost me more then that to recover my original bench seat in my Stocker.
In todays world, with the cars being much faster, a correctly built Alum. seat is way safer. As far as seat covers go, did you ever try to sit in a bare Alum. seat sitting in the sun and heat?
That's my two cents and if I hadn't spent all that money on the bench seat I would have a nice pair of Kirky Alum. buckets in my hot rod now.
Have a good day.

Respectfully,
Henry Kunz 1534 H/SA

[FireSale]

Originally Posted by Henrys Toy

Good morning,
It cost me more then that to recover my original bench seat in my Stocker.
In todays world, with the cars being much faster, a correctly built Alum. seat is way safer. As far as seat covers go, did you ever try to sit in a bare Alum. seat sitting in the sun and heat?
That's my two cents and if I hadn't spent all that money on the bench seat I would have a nice pair of Kirky Alum. buckets in my hot rod now.
Have a good day.

Respectfully,
Henry Kunz 1534 H/SA

This is a good point. It's not about your speed it's about the speed and handling of the car chasing you.

Regarding cam buckle harnesses, look at them at the track first and ask to try belting yourself in. Some are not that easy to clip up.

[Rose Racing]

Just for clarification benches dont belong in race cars(My Opinion)... for safety reasons so no chance of it going back in.....