Stock ?s

Lyn Smith · 10-25-2021, 09:28 AM

Rod, First off you need to get a rule book and read up on Stock eliminator. Second I would suggest you do the 305 block with the spacer bearings as that solves a lot of problems with finding a good 265 block and dealing with the starter mount, main seal, oil filter adapter etc. I have done a 265 that way and it works fine. Also with a 265 original block you have to use a forged crank so it will clear the internals of the block. 305 block doesn't have this problem. Any 265 ,283 crank will work.

10-25-2021, 09:28 AM	#4
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,211 Likes: 291 Liked 997 Times in 201 Posts	Re: Stock ?s Rod, First off you need to get a rule book and read up on Stock eliminator. Second I would suggest you do the 305 block with the spacer bearings as that solves a lot of problems with finding a good 265 block and dealing with the starter mount, main seal, oil filter adapter etc. I have done a 265 that way and it works fine. Also with a 265 original block you have to use a forged crank so it will clear the internals of the block. 305 block doesn't have this problem. Any 265 ,283 crank will work. Last edited by Lyn Smith; 10-25-2021 at 09:32 AM.