Solid lifters on a hydraulic cam

Glenn Briglio · 04-28-2022, 12:08 PM

Quote:

Originally Posted by qflash

I have installed a new Bullet hydraulic cam and solid lifters in my stocker and broke it in properly.
Now I need to set the valves for racing. What valve lash for valves set cold as opposed to hot?
Thanks, Ron

Depends whether you have aluminum or iron heads. Best method is set them cold then see what it changes to when hot.

qflash · 04-28-2022, 12:54 PM

Iron heads on an iron block.

65signet · 04-28-2022, 04:19 PM

You can set them really tight, from 3 to 5 thousand's

04-28-2022, 12:54 PM	#2
qflash Junior Member Join Date: Apr 2013 Location: Raised in PA, Live in San Angelo, TX Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	Re: Solid lifters on a hydraulic cam Iron heads on an iron block.

04-28-2022, 04:19 PM	#3
65signet Member Join Date: May 2010 Location: El Dorado Ca. Posts: 123 Likes: 299 Liked 48 Times in 22 Posts	Re: Solid lifters on a hydraulic cam You can set them really tight, from 3 to 5 thousand's __________________ Steven Barnes Stock 704 N/SA