Stock floor Driveshaft tunnel

CMcAllister · 11-12-2022, 09:30 PM

Depending on how low the car sits, how high the pinion is, suspension travel and how the trans/engine is in the car, you can get into trouble on those with the height of the tunnel and crossmembers in the floor.

hilton · 11-13-2022, 08:45 PM

Thank you , I'll be calling Mark Williams

Terry Cain · 11-14-2022, 04:15 AM

FYI. You can replace tunnel (make removable) in Super Stock but not in Stock.

Run to Rund · 11-15-2022, 08:38 AM

I run a 4" MW aluminum driveshaft in an Olds F85. I cut the lede extensions off the seat belt bolts for more clearance, otherwise had good clearance.

11-12-2022, 09:30 PM	#1
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 617 Likes: 17 Liked 920 Times in 259 Posts	Re: Stock floor Driveshaft tunnel Depending on how low the car sits, how high the pinion is, suspension travel and how the trans/engine is in the car, you can get into trouble on those with the height of the tunnel and crossmembers in the floor.

11-13-2022, 08:45 PM	#2
hilton Junior Member Join Date: Aug 2009 Location: Staten Island N.Y. Posts: 75 Likes: 121 Liked 14 Times in 7 Posts	Re: Stock floor Driveshaft tunnel Thank you , I'll be calling Mark Williams

11-14-2022, 04:15 AM	#3
Terry Cain Senior Member Join Date: Feb 2008 Location: Georgetown, Indiana (close to Louisville, KY) Posts: 778 Likes: 530 Liked 231 Times in 107 Posts	Re: Stock floor Driveshaft tunnel FYI. You can replace tunnel (make removable) in Super Stock but not in Stock. __________________ Terry Cain ???? STK tcain19689585@gmail.com

11-15-2022, 08:38 AM	#4
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 584 Likes: 9 Liked 54 Times in 27 Posts	Re: Stock floor Driveshaft tunnel I run a 4" MW aluminum driveshaft in an Olds F85. I cut the lede extensions off the seat belt bolts for more clearance, otherwise had good clearance.