Acid

[Billy Nees]

Originally Posted by bubski

Now shot blast those things real good and paint the ports with a heavy coat of cast blast paint , now finish the valve job !! its gonna look real outta place with those shiny angles in the blasted and painted port and that is good !!

Ya know, just a couple of ignorant observations; as per the Stock rules under Cylinder Heads, "any film coating of intake or exhaust runners" is prohibited. Isn't paint a "film" coating? Also per the Stock rules under Cylinder Heads, "must retain original valve sizes at original angles +/- 1 degree". Just how far are you "milling" that head and at how much of an angle? Not fer nuthin' but if you're angle "milling" that head the usual .125 then you're moving that "angle" more than 1 degree!