Have you ever thought about............... - Page 3

Darcy Clarke · 01-14-2023, 09:41 AM

I am fortunate to be able to race my dream cars the Twins!! The best part is being able to travel and race with a lot of my Freinds and New Friends, as a Kid I couldn't have dreamed this Big!!

Darcy Clarke
6254
A/SA SS/EA

GUMP · 01-14-2023, 10:23 AM

My plan before the factory cars came out, was to run GTO's. I wanted to start with a 1964 and work my way through them ending with a 1971.

pro7474 · 01-14-2023, 10:54 AM

Already own my dream car Chevy Colbalt SuperMod

Alan Roehrich · 01-14-2023, 11:53 AM

I don't know if I'll be able to make it happen, but what I have in mind is certainly not the the most competitive combination, and probably not the most competitive with either the body or the engine. In fact, in a different body, the engine is 12HP softer. But that's okay, it's relatively competitive, it's cool, and it's my favorite. It's not even the only one out there. But it does fit in with current programs I'm involved with.

It's one reason that I don't get super torn up about bogus factors and paper cars, etc. Because I didn't choose the most competitive combination possible, and I'm not chasing points, etc. This is pretty much just fun now. It doesn't make financial sense at all, and I know I surely can't afford to pursue even a Division title, if I can even drive worth a damn anymore.

I don't know that there's a combination I'd rather run, but there are some I'd love to play with. Maybe Fred's 62 Corvette fuel injected 327, a 67 Corvette with an L-71 (I'd prefer an L-88), or a 65 Chevelle 396, something really stupid, like a 409/425 in a 62-64 Impala, or something different, maybe a cool old Pontiac 421 Super Duty, or a Buick. None of them are killer combinations, most of them are reasonably competitive, in a faster class, and would be just fun.

MAURICE BLENDHEIM · 01-14-2023, 02:46 PM

I thought about a homebuilt Tripoli Turquoise SS/EA 1968 Nova. It would have a Quick Fuel Carb (from Bridges), with "401" heads (from Bridges), 4.200" bore Big Block filled with parts from CP, BULLET, JESEL and MANLEY, MSD. The mechanical remainder of my thoughts include ROSSLER, ATI, AFCO, CSR, MAGNAFUEL, MOROSO, MARK WILLIAMS, WILWOOD.

The interior would be Light Grey(cdn) with KIRKEY's, GMPP gauges, PPP shifter and the necessary RACEPAK and MSD stuff. A bunch of Moly tubing fit to the inside with care. The odometer set to 396375 and the clock set to 9.20?

Also thoughts of some Real Good Buddies adding a helping hand and a generous supply of laughter, to keep things going.

Things that I didn't think about was the ridiculous amount of money a guy would have to spend. Realities like trying to weld in confined areas while being "big", metal slivers, remembering to wear safety glasses, cuts, bruises, late nights and spare time?
Oh I almost forgot, the car breaking loose in the trailer on the way back from being painted and smashing the front end against the back door of the trailer. It was a good thing we backed it in, the front fenders and hood were easy to replace. Nothing another month in the body shop and a complete paint job, to keep things real again.

At this point it sits as a Dusty piece of Art that survived a Quadruple Bypass, Covid (x2 once without and once with vaccines), Bladder Surgery and Bladder Infection (it's not for the weak).

My current thoughts are back onto the small amount left to complete it and have it out this season (no more excuses). Perfect timing, now that Mission Raceway lost its LODRS Race. Hope to be Testing and Tuning soon and heading to Seattle for the closest Divisional Race(s).

Hope to meet some more of you guys this year. If you see me it's the only Tripoli Turquoise SS/EA 1968 Nova (claimed to be a 1970), without Black Wheels.

The most rewarding part of my thoughts were the Engineering of it all and the Enjoyment I got from building everything myself. Can't wait to see how it all works.

Thoughts…MB.

TBear5033 · 01-14-2023, 02:54 PM

Took 8 years to sweet talk my way into the cockpit... Plan on racing it till I'm 80 yrs young!

Tom P · 01-21-2023, 06:01 AM

Maurice, I don't believe you about the "No igloos" in Langley.

I think it's time to make that a SS/E (no A, eh) and run the stick races.

MAURICE BLENDHEIM · 01-21-2023, 09:34 AM

Tom…The car still retains its original 3 pedals. I have a new G-Force, Long Shifter and Youngblood Clutch on the shelf and I’ve modified the floor to accommodate the manual installation. I had the ROSSLER and a couple buckets of red fluid to use up first.
In regards to the Igloos, they are a little further North.

MB

stocker396 · 01-23-2023, 09:30 AM

I am currently doing it. 1966 Chevelle SS396 396/325/ NOW 316! whoo hoo! . Not competitive yet but working on it. Its unique, No one else is doing one, and I've had it since High School.

Stan Hawes · 01-23-2023, 11:55 AM

Remember, anyone can restore a car but it takes a real man to cut one up.

Stan Hawes, Stirring the pot.

01-14-2023, 09:41 AM	#21
Darcy Clarke Member Join Date: Mar 2008 Posts: 201 Likes: 22 Liked 511 Times in 35 Posts	Re: Have you ever thought about............... I am fortunate to be able to race my dream cars the Twins!! The best part is being able to travel and race with a lot of my Freinds and New Friends, as a Kid I couldn't have dreamed this Big!! Darcy Clarke 6254 A/SA SS/EA

01-14-2023, 10:23 AM	#22
GUMP VIP Member Join Date: May 2002 Location: Shelby, NC Posts: 1,817 Likes: 2,157 Liked 2,336 Times in 549 Posts	Re: Have you ever thought about............... My plan before the factory cars came out, was to run GTO's. I wanted to start with a 1964 and work my way through them ending with a 1971. __________________ Daren Poole-Adams NHRA Stock/SS 2007

01-14-2023, 10:54 AM	#23
pro7474 Junior Member Join Date: Mar 2005 Posts: 52 Likes: 0 Liked 3 Times in 1 Post	Re: Have you ever thought about............... Already own my dream car Chevy Colbalt SuperMod

01-14-2023, 11:53 AM	#24
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,105 Likes: 1,564 Liked 1,789 Times in 408 Posts	Re: Have you ever thought about............... I don't know if I'll be able to make it happen, but what I have in mind is certainly not the the most competitive combination, and probably not the most competitive with either the body or the engine. In fact, in a different body, the engine is 12HP softer. But that's okay, it's relatively competitive, it's cool, and it's my favorite. It's not even the only one out there. But it does fit in with current programs I'm involved with. It's one reason that I don't get super torn up about bogus factors and paper cars, etc. Because I didn't choose the most competitive combination possible, and I'm not chasing points, etc. This is pretty much just fun now. It doesn't make financial sense at all, and I know I surely can't afford to pursue even a Division title, if I can even drive worth a damn anymore. I don't know that there's a combination I'd rather run, but there are some I'd love to play with. Maybe Fred's 62 Corvette fuel injected 327, a 67 Corvette with an L-71 (I'd prefer an L-88), or a 65 Chevelle 396, something really stupid, like a 409/425 in a 62-64 Impala, or something different, maybe a cool old Pontiac 421 Super Duty, or a Buick. None of them are killer combinations, most of them are reasonably competitive, in a faster class, and would be just fun. __________________ Alan Roehrich 212A G/S

01-14-2023, 02:46 PM	#25
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 569 Likes: 307 Liked 284 Times in 87 Posts	Re: Have you ever thought about............... I thought about a homebuilt Tripoli Turquoise SS/EA 1968 Nova. It would have a Quick Fuel Carb (from Bridges), with "401" heads (from Bridges), 4.200" bore Big Block filled with parts from CP, BULLET, JESEL and MANLEY, MSD. The mechanical remainder of my thoughts include ROSSLER, ATI, AFCO, CSR, MAGNAFUEL, MOROSO, MARK WILLIAMS, WILWOOD. The interior would be Light Grey(cdn) with KIRKEY's, GMPP gauges, PPP shifter and the necessary RACEPAK and MSD stuff. A bunch of Moly tubing fit to the inside with care. The odometer set to 396375 and the clock set to 9.20? Also thoughts of some Real Good Buddies adding a helping hand and a generous supply of laughter, to keep things going. Things that I didn't think about was the ridiculous amount of money a guy would have to spend. Realities like trying to weld in confined areas while being "big", metal slivers, remembering to wear safety glasses, cuts, bruises, late nights and spare time? Oh I almost forgot, the car breaking loose in the trailer on the way back from being painted and smashing the front end against the back door of the trailer. It was a good thing we backed it in, the front fenders and hood were easy to replace. Nothing another month in the body shop and a complete paint job, to keep things real again. At this point it sits as a Dusty piece of Art that survived a Quadruple Bypass, Covid (x2 once without and once with vaccines), Bladder Surgery and Bladder Infection (it's not for the weak). My current thoughts are back onto the small amount left to complete it and have it out this season (no more excuses). Perfect timing, now that Mission Raceway lost its LODRS Race. Hope to be Testing and Tuning soon and heading to Seattle for the closest Divisional Race(s). Hope to meet some more of you guys this year. If you see me it's the only Tripoli Turquoise SS/EA 1968 Nova (claimed to be a 1970), without Black Wheels. The most rewarding part of my thoughts were the Engineering of it all and the Enjoyment I got from building everything myself. Can't wait to see how it all works. Thoughts…MB. Last edited by MAURICE BLENDHEIM; 01-14-2023 at 03:09 PM. Reason: Reset Clock

01-14-2023, 02:54 PM	#26
TBear5033 Junior Member Join Date: Apr 2020 Location: Louisburg, KS Posts: 32 Likes: 6 Liked 112 Times in 16 Posts	Re: Have you ever thought about............... Took 8 years to sweet talk my way into the cockpit... Plan on racing it till I'm 80 yrs young! Attached Thumbnails

01-21-2023, 06:01 AM	#27
Tom P Senior Member Join Date: Mar 2002 Posts: 707 Likes: 30 Liked 239 Times in 94 Posts	Re: Have you ever thought about............... Maurice, I don't believe you about the "No igloos" in Langley. I think it's time to make that a SS/E (no A, eh) and run the stick races.

01-21-2023, 09:34 AM	#28
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 569 Likes: 307 Liked 284 Times in 87 Posts	Re: Have you ever thought about............... Tom…The car still retains its original 3 pedals. I have a new G-Force, Long Shifter and Youngblood Clutch on the shelf and I’ve modified the floor to accommodate the manual installation. I had the ROSSLER and a couple buckets of red fluid to use up first. In regards to the Igloos, they are a little further North. MB

01-23-2023, 09:30 AM	#29
stocker396 Member Join Date: Dec 2013 Location: Santa Fe TEXAS Posts: 109 Likes: 2 Liked 58 Times in 16 Posts	Re: Have you ever thought about............... I am currently doing it. 1966 Chevelle SS396 396/325/ NOW 316! whoo hoo! . Not competitive yet but working on it. Its unique, No one else is doing one, and I've had it since High School. __________________ Overkill is Under-rated

01-23-2023, 11:55 AM	#30
Stan Hawes Junior Member Join Date: Jan 2002 Location: gresham, ore Posts: 35 Likes: 111 Liked 87 Times in 17 Posts	Re: Have you ever thought about............... Remember, anyone can restore a car but it takes a real man to cut one up. Stan Hawes, Stirring the pot.