roller lifter

SGSST109E · 03-14-2023, 08:40 AM

Did you call Jesel?

Weekend Racer · 03-14-2023, 05:04 PM

Quote:

Originally Posted by SGSST109E

Did you call Jesel?

I have sent an email with some pics ,still waiting !

kirk · 03-14-2023, 08:05 PM

I have seen a few customers had the shop here mill a groove on each lifter. It doesn't need much, seems like it was only 3 thousands deep. Also a issue with Comp lifters and SBC dart block. If you don't groove them, keep a eye on the amount of oil under your valve covers............

Weekend Racer · 03-15-2023, 09:12 PM

Quote:

Originally Posted by SGSST109E

Did you call Jesel?

Yes ! Here the answer I got from Jesel:``I would mill a flat on the body just to be safe, especially if you are using the lifter band to feed bore to bore ``

firebird · 03-16-2023, 11:58 AM

don't any manufacture make a lifter to cure this problem?

Weekend Racer · 03-23-2023, 07:24 PM

Last answer from Jesel tech! Use bushing from us , and if your are installing bushings you will not need to machine the flat on the lifter.

03-14-2023, 08:40 AM	#1
SGSST109E Member Join Date: Jun 2007 Location: NJ Posts: 351 Likes: 62 Liked 126 Times in 61 Posts	Re: roller lifter Did you call Jesel?

03-14-2023, 08:05 PM	#3
kirk Junior Member Join Date: Dec 2002 Location: Kalamazoo Michigan Posts: 34 Likes: 2 Liked 5 Times in 4 Posts	Re: roller lifter I have seen a few customers had the shop here mill a groove on each lifter. It doesn't need much, seems like it was only 3 thousands deep. Also a issue with Comp lifters and SBC dart block. If you don't groove them, keep a eye on the amount of oil under your valve covers............

03-16-2023, 11:58 AM	#5
firebird Junior Member Join Date: Jan 2011 Posts: 52 Likes: 1 Liked 1 Time in 1 Post	Re: roller lifter don't any manufacture make a lifter to cure this problem?

03-23-2023, 07:24 PM	#6
Weekend Racer Junior Member Join Date: Feb 2003 Location: P.Q. Posts: 68 Likes: 1 Liked 1 Time in 1 Post	Re: roller lifter Last answer from Jesel tech! Use bushing from us , and if your are installing bushings you will not need to machine the flat on the lifter.