|
|
![]() |
#1 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,821
Likes: 2,915
Liked 5,133 Times in 1,957 Posts
|
![]() Quote:
Just my opinion :-) Should have mentioned, I cross my straps too, in some applications. I had MJ make me some vinyl wrap- around velcro sleeves to keep the straps from wearing against each other. Marky ;-)
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
![]() |
![]() |
Liked |
![]() |
#2 |
Member
Join Date: Oct 2002
Location: kansas
Posts: 236
Likes: 508
Liked 249 Times in 48 Posts
|
![]()
Friend of mine, OCD dirt track racer, uses blocks under his chassis and then ties it down.
Next step for him is to tie down the rack that the car is sitting on. Yours may be better but he claims his moved more than the car. |
![]() |
![]() |
![]() |
#3 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,663
Likes: 1,954
Liked 10,830 Times in 2,251 Posts
|
![]()
The race car we carry on top. On the rear we use two non adjustable straps that surround and cross the center section. If the car is not straight on the lift one of the rear straps will be loose when the front is pulled forward and down. You have two choices re position the car or stop 20 miles down the road and re tighten the front straps. Due to the crown in the road the car always slides down hill, curbside. On the front I use four straps, two straps crossed tied to the Kmember and two lighter safety straps going to two 7/16 eye bolts to limit front suspension travel. After everything is tight we recheck at 50,75,100 miles until lit stops moving around. In the morning when tire pressure is lower retighten the straps.
If you want to limit upward movement turn buckles and pined blocks work. Also we strap down the lift at all four corners. Try to carry a spare strap for every position. Last edited by Larry Hill; 07-22-2023 at 09:33 AM. |
![]() |
![]() |
![]() |
|
|