|
|
![]() |
#1 |
VIP Member
Join Date: Nov 2001
Location: The Lowcountry.
Posts: 2,961
Likes: 2,550
Liked 2,692 Times in 951 Posts
|
![]()
My guess was $25,000 but if Charlie Westcott still does Hemi heads and engines it's closer to at least 30k.
|
![]() |
![]() |
![]() |
#2 |
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,105
Likes: 1,564
Liked 1,789 Times in 408 Posts
|
![]()
I'm pretty sure at some point during the original presentation, Darin said a truly competitive Hemi Challenge engine would cost you around $100K. I'd guess heads, intake, and carburetors are more than half that.
__________________
Alan Roehrich 212A G/S |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Apr 2022
Location: Noblesville,In
Posts: 108
Likes: 7
Liked 58 Times in 36 Posts
|
![]()
I was under the impression that they cost 30k or very close to that ready to bolt on. The intake is 5k and the cam is 1550. A new set of 18-19 inch headers is 6k also
__________________
SS/AH 328X |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Aug 2003
Location: Atlanta
Posts: 476
Likes: 20
Liked 70 Times in 22 Posts
|
![]()
If anyone is looking for a set or 2 of the Edelbrock heads message me or get in touch with Glenn Barnett on Facebook. Barnett has several. They also have them listed on Ebay.
__________________
Stewart Way 2424 SS |
![]() |
![]() |
Liked |
![]() |
#5 |
Junior Member
Join Date: Dec 2011
Posts: 27
Likes: 5
Liked 2 Times in 2 Posts
|
![]()
Is it legal with Hollow steam valves ???
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Dec 2002
Posts: 915
Likes: 1,132
Liked 682 Times in 203 Posts
|
![]()
Hemi valves are 5/16, not much to take out of the stem. I do not think anyone makes or uses them, could be wrong!
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Apr 2022
Location: Noblesville,In
Posts: 108
Likes: 7
Liked 58 Times in 36 Posts
|
![]()
Dan didn’t Barton try sodium filled at one point?
__________________
SS/AH 328X |
![]() |
![]() |
![]() |
|
|