stocker cams

john ancona · 04-25-2025, 03:24 PM

Quote:

Originally Posted by SS3860

Just got one from Bullet, took about 6 weeks.

Tom Flowers
E/SA 3860

Can I ask what lifters will you be using Thank You

SS3860 · 04-25-2025, 09:04 PM

Quote:

Originally Posted by john ancona

Can I ask what lifters will you be using Thank You

Ive had some tool steel DLC lifters on order from PPPC for a while. This stock motor build has been an experience to say the least.

Tom Flowers
E/SA 3860

john ancona · 04-25-2025, 09:51 PM

Quote:

Originally Posted by SS3860

Ive had some tool steel DLC lifters on order from PPPC for a while. This stock motor build has been an experience to say the least.

Tom Flowers
E/SA 3860

I have had a set of PPPC coated solid lifters for at least two or more years now

Mike Gray · 04-25-2025, 11:12 PM

Quote:

Originally Posted by john ancona

I have had a set of PPPC coated solid lifters for at least two or more years now

17 months for mine but I didn’t really notice because the car was in paint at the same time and that was 21 months.

Alan Roehrich · 04-26-2025, 05:27 PM

You guys might want to look at Rocketman Coatings for cam and lifter coating. Never been a fan of DLC to begin with.

Jrh5220 · 04-28-2025, 02:07 PM

Quote:

Originally Posted by Alan Roehrich

You guys might want to look at Rocketman Coatings for cam and lifter coating. Never been a fan of DLC to begin with.

Alan have you tried any of rocketman coating??

Alan Roehrich · 04-28-2025, 06:40 PM

Quote:

Originally Posted by Jrh5220

Alan have you tried any of rocketman coating??

Since I've been fairly tied up recovering from cancer and treatment, my stuff is in pieces. However, I have seen the test results, the data, and some parts that have been coated and run. I have also spoken with some well known racers, who use some well known engine builders, everyone is satisfied. Unlike the experiences I've seen with expensive DLC coatings, that are often impossible to get. I am not going to "drop names", that's not how I do things.

His coatings will be going in an engine I'm building in the next 60 days, and in at least two engines I'm involved with personally.

GEORGE PETERSON · 04-29-2025, 04:17 PM

Quote:

Originally Posted by Alan Roehrich

You guys might want to look at Rocketman Coatings for cam and lifter coating. Never been a fan of DLC to begin with.

Rocketman has a picture of our '67 Camaro with my name removed from the door. We do not use his stuff.

George Peterson

ProfessorRock · 04-29-2025, 06:42 PM

George - is that john Duzacs car.? the red one if so ,it absolutely did have my earlier coatings. John set 2 natl. records with it.
I will Pm you to verify.

04-26-2025, 05:27 PM	#5
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,113 Likes: 1,571 Liked 1,826 Times in 414 Posts	Re: stocker cams You guys might want to look at Rocketman Coatings for cam and lifter coating. Never been a fan of DLC to begin with. __________________ Alan Roehrich 212A G/S

04-29-2025, 06:42 PM	#9
ProfessorRock Junior Member Join Date: Aug 2022 Location: PHXarea. +Ohio Posts: 82 Likes: 27 Liked 48 Times in 24 Posts	Re: stocker cams George - is that john Duzacs car.? the red one if so ,it absolutely did have my earlier coatings. John set 2 natl. records with it. I will Pm you to verify. __________________ Rocketmancoatings