SBC stamped steel rocker ones, what brand?

SSDiv6 · 06-09-2008, 11:31 PM

Quote:

Originally Posted by rustbucket79

I can't find any of the Crane Nitro Carb rockers (1.5 ratio, 3/8 stud) as my suppliers are sold out. What are some of the other brands you guys use, similar application. (1.260" single spring)

GM, Comp, Isky, Lunati, ????

The Nitro Carb rockers are also available from Elgin. Have you checekd inventory with Competition Products?

http://www.competitionproducts.com/p...s.asp?dept=474

dean ribeiro · 06-13-2008, 07:37 AM

just got a set of Crane Nitro rockers through Scoggin Dickey in Texas (last week). Thye had Crane drop ship directly to me overnight. Thye were very helpful and showed up on time!

rustbucket79 · 06-14-2008, 02:04 AM

Thanks guys, I ground/polished a nice radius on a set of Melling long slot's that we had in stock for a few years for the customer to try. (we had been using them years ago prior to the Nitro Carbs) He's going to pull them after his next race for me to magnaflux.

The next step is is to dig through our inventory of stock GM rockers and do the required clearancing mods.

I have heard that Crane was having some supply issues but hopefully it will be resolved quickly for the suppliers I use.

06-13-2008, 07:37 AM	#2
dean ribeiro Senior Member Join Date: Oct 2003 Location: candia, nh Posts: 520 Likes: 58 Liked 238 Times in 78 Posts	Re: SBC stamped steel rocker ones, what brand? just got a set of Crane Nitro rockers through Scoggin Dickey in Texas (last week). Thye had Crane drop ship directly to me overnight. Thye were very helpful and showed up on time!

06-14-2008, 02:04 AM	#3
rustbucket79 Junior Member Join Date: Aug 2004 Location: Canada Posts: 45 Likes: 0 Liked 0 Times in 0 Posts	Re: SBC stamped steel rocker ones, what brand? Thanks guys, I ground/polished a nice radius on a set of Melling long slot's that we had in stock for a few years for the customer to try. (we had been using them years ago prior to the Nitro Carbs) He's going to pull them after his next race for me to magnaflux. The next step is is to dig through our inventory of stock GM rockers and do the required clearancing mods. I have heard that Crane was having some supply issues but hopefully it will be resolved quickly for the suppliers I use.