|
![]() |
#9 |
Junior Member
Join Date: Jul 2005
Location: Boise, Id
Posts: 56
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Final Update:
After driving with the Allison Transynd in my A413 for several months, I have definite proof it's not compatible. Here's the data in the order of modification. I apologize for not having any quarter mile results, but I figured the MPG would be a good indicator: Overall gear ratio: 3.22 Fluid: Dexron III MPG: 25 Trans temp on freeway: 130 Overall gear ratio: 3.02 Fluid: Transynd MPG: 18 Trans temp on freeway: 190 Overall gear ratio: 2.6 Fluid: Transynd MPG: 22 Trans temp on freeway: 190 Overall gear ratio: 3.02 Fluid: Dexron III MPG: 25 Trans temp on freeway: 140 Note how the temperature is still slightly higher after I flushed out the Transynd and put Dexron III back in. There must be a small amount remaining. I'll flush it again for good measure. I don't have exact knowledge as to what caused this drop in MPG (performance too!) and increased heat, but I feel the torque converter was the culprit as it may have been incompatible with the Transynd. Maybe Transynd requires a different TC design? Well, this was a failed experiment, but what's life without adventure? A good friend of mine who raced NHRA Comp Eliminator said that in experiments like this, 90% is research & development. Only 10% of the parts, fluids, & procedures tested are actually used to race. I hope everyone can get some useful information from this.
__________________
Rich Hedden 6011 BF/S |
![]() |
![]() |
|
|