Pro gear users please step in

Mike Pearson · 08-19-2008, 02:49 PM

There is really no reason to run a pro gear unless you are running a manual trans. You will get better gear life from a heat treated gear. I only run a pro gear in my car because the ratio I use is only available in a pro gear. The 488 gear is very strong. You dont need a pro gear. It will save a few bucks also. The reason the teeth take a set is because of the soft alloy of the steel. They also wear much faster.

08-19-2008, 02:49 PM	#7
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,450 Likes: 615 Liked 1,930 Times in 580 Posts	Re: Pro gear users please step in There is really no reason to run a pro gear unless you are running a manual trans. You will get better gear life from a heat treated gear. I only run a pro gear in my car because the ratio I use is only available in a pro gear. The 488 gear is very strong. You dont need a pro gear. It will save a few bucks also. The reason the teeth take a set is because of the soft alloy of the steel. They also wear much faster. __________________ Mike Pearson 2485 SS