|
![]() |
#2 |
Junior Member
Join Date: Jun 2004
Location: Cedar Run, NJ
Posts: 38
Likes: 868
Liked 10 Times in 3 Posts
|
![]()
Chris,Check all the grounds around the batts,( the 10 ga. wires that run off the neg cables),also a quick connect that gets batt acid in it on the pass side10 ga ground cable.
If all looks good replace the ignition switch,over the years i've seen a lot cause trouble. Good luck Rich Aman,1631 G/S |
![]() |
![]() |
|
|