|
|
05-22-2007, 10:17 AM
|
#3 |
|
VIP Member
Join Date: Mar 2007
Posts: 2,441
Likes: 611
Liked 1,909 Times in 573 Posts
|
Check the air flap on the secondary. it could be open to far causing a lean pop. should measure 1.380 from the choke horn. also close in around the secondary metering rod holes in the gasket with electrical tape. I also run a 90 degree sparlk plug boot on the main vent tube to stop any splash. Check to make sure that your fuel flow at the carb is a gallon in about 20 seconds.
__________________
Mike Pearson 2485 SS |
|
|
|
|
Threaded Mode