Bleeding a hyd clutch

Stewart Way · 05-10-2007, 02:23 PM

Tony
Tried the air pressure and that didn't work. We hooked a vacuum pump up to the top of the reservoir and disconnected the braided hose swivel at the slave while submerged in fluid. Pumped the slave a few times keeping it under fluid. Also pumped fluid from the pan the slave was in up thru the master and out of the reservoir with the Mity Vac. Put the slave and line back together keeping it submerged in fluid thru the whole process. Still not enough travel in the slave cyl to disengage the clutch. My son gave up. I'm too stuborn. Still taking suggestions.

05-10-2007, 02:23 PM	#6
Stewart Way Member Join Date: Aug 2003 Location: Atlanta Posts: 476 Likes: 20 Liked 70 Times in 22 Posts	Tony Tried the air pressure and that didn't work. We hooked a vacuum pump up to the top of the reservoir and disconnected the braided hose swivel at the slave while submerged in fluid. Pumped the slave a few times keeping it under fluid. Also pumped fluid from the pan the slave was in up thru the master and out of the reservoir with the Mity Vac. Put the slave and line back together keeping it submerged in fluid thru the whole process. Still not enough travel in the slave cyl to disengage the clutch. My son gave up. I'm too stuborn. Still taking suggestions. __________________ Stewart Way 2424 SS