HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-24-2008, 06:42 PM   #19
House of Darts
Member
 
Join Date: Mar 2007
Posts: 346
Likes: 19
Liked 20 Times in 15 Posts
Default Re: small home shop heater

Any form of heat whether electric, oil or gas presents a few issues. Most unit require that you have a" no pile" zone 36" from the heat source( you can't stack anything in that area). If you plan to do any maintence, the fumes from brake clean, lacquer thinner, etc are a real source for ignition. Open element heat units, like electric, naturally attract dust and when this lays on the elements, SHOUT FIRE. The torpedo heaters, propane or kero, are very loud and spit fire from time to time. The best source for heat is any unit that takes combustion air from the outside. They usually have thermostats and blower motors and has less of a "no pile" zone. Propane or nat. gas is the best and the units that use heating fuel are OK. The waste oil heaters are a pain and don't burn syn. oils very well. Electric heaters are alright if you can mount them high in the ceiling, 12' w/a 4' cushion before the ceiling. I have had 4 shops in 15 yrs. and the gas throught the wall is the best and safest. I also spray in my shop and safety is my main concern
House of Darts is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.