Lightweight wheels

Nova4301 · 11-25-2008, 03:28 PM

I have been trying the compare wheel weights before I buy. I can find just a couple weights as they are listed in jegs and summit, but I was wondering if anyone knew of a place to find weights for many different brands (i.e. centerlines, bogart, american racing, weld racing, etc.). Generally, I am looking for 15x3 1/2 or 15x4 front wheels and 15X8 or 15X10 back wheels (5 lug). I have draglites now (15x8 and 15x 31/2, I am not even sure on how much they weigh) and I was looking to get rid of some weight.

Darrin Christen · 11-25-2008, 03:58 PM

When I switched from Weld Draglites 3 1/2" front wheels to there Weld Magnum Drag 2.0 one piece 3 1/2" wheels The difference was 7 lbs. lighter per wheel and tire. I weighed the old ones with good year 25" tall tires and the new ones with hoosier 26" tall tires. My wallet was also alot lighter! lol Darrin Christen 4878SST

Nova4301 · 11-25-2008, 05:00 PM

Quote:

Originally Posted by Darrin Christen

When I switched from Weld Draglites 3 1/2" front wheels to there Weld Magnum Drag 2.0 one piece 3 1/2" wheels The difference was 7 lbs. lighter per wheel and tire. I weighed the old ones with good year 25" tall tires and the new ones with hoosier 26" tall tires. My wallet was also alot lighter! lol Darrin Christen 4878SST

I appreciate the info Darrin. I believe I remember having some close races with you a few years back in super street (could have gone either way kind of racing). Anyhow, I am probably either going with those welds or the new Pro-5 M/T fronts. I wish M/T made 15x8 or 15x10, but all they have is 16X16 for the rears...I guess I could always order one and cut it in half.

Myron Piatek · 11-25-2008, 05:12 PM

Your best bet would be to call the manufacturers. But remember that you start compromising strength with some super lightweight wheels. I recall a center breaking out of a wheel when a car turned a corner past the ticket booth at Norwalk years ago (Rink/GTO/Nova???) and an early Camaro leaking air in the staging lanes at Dinwiddie from a stress crack.

Holeshot Wheels has a wide variety of styles which are pretty light and with custom offsets. They have also started producing lighter one piece billet fronts which will eventually be available in all of their styles. But you'll need to call for specific weights.
www.holeshotwheels.com

Dave Turner · 11-25-2008, 06:27 PM

Myron, what is the history behind Holeshot wheels? Just curious as I had never heard of them until seeing the product on your car - and I work in the aftermarket trade. (Not sure what that says about anything but I have not run into them at trade shows etc.)

Darrin Christen · 11-25-2008, 07:24 PM

Quote:

Originally Posted by Nova4301

I appreciate the info Darrin. I believe I remember having some close races with you a few years back in super street (could have gone either way kind of racing). Anyhow, I am probably either going with those welds or the new Pro-5 M/T fronts. I wish M/T made 15x8 or 15x10, but all they have is 16X16 for the rears...I guess I could always order one and cut it in half.

You raced a white corvette with the black nose and wheels, how could I forget! You and your brother Jeremy were always on the number. I seem to rember losing a close one to you at Noble in the late rounds a few years back. Are you guys still running SST?

Myron Piatek · 11-25-2008, 07:47 PM

Dave,
They also go under World Class Machine just north of Daytona Beach, FL. It's a CNC machine shop whos owner is also a car enthusiast that origianlly decided to do wheels on the side. I hooked up with them in 1995 but I'm not clear on the history before then. It is a small wheel business when compared to the "name" brands, but word of mouth, deals with chassis builders, dealers like Harlow Tire, my efforts & others have kept them busy enough to not need much more regular advertising in the past. They have been doing more advertising lately with a few ads in National Dragster in the last few years, been attending some car shows and races, been at the PRI show in Orlando for the last 2 years and will be there again in a couple of weeks. By not getting too big, too fast, they can concentrate more on customer service, quality and do more custom applications & offsets.

I've always liked to describe their products as a good balance of weight, strength and price. But they are constantly looking to reduce weight without compromises and have been getting SFI certifications. Their one piece forged front wheels (not sure if "billet" was accurate in my earlier post) is their latest effort to save weight. But their original 3-piece design, still pretty light, also offer the options of offset changes, damaged section replacement, etc. instead of having to buy a whole new wheel.

Dave Turner · 11-25-2008, 08:46 PM

Thanks for the background on Holeshot Myron. I don't know how I missed them at PRI. I've been at all of the Orlando shows.

Myron Piatek · 11-25-2008, 09:02 PM

lol
As big as that place is, it's easy to miss a few displays. They were way in the back the first time and are slowly moving up. I wish I had time than just Saturday to spend there.

greg fulk · 11-26-2008, 03:34 AM

When I took the Center-line Convo-pros off my car last spring & put the M/T wheels on it I took 6lbs off the front of the car....( i was thinking it was 6lbs a wheel but that sounds like to much). I went from Hoosier 28 front runners to M/T 27.5 also.

11-25-2008, 03:28 PM	#1
Nova4301 Junior Member Join Date: Sep 2008 Location: Moore, OK Posts: 54 Likes: 0 Liked 0 Times in 0 Posts	Lightweight wheels I have been trying the compare wheel weights before I buy. I can find just a couple weights as they are listed in jegs and summit, but I was wondering if anyone knew of a place to find weights for many different brands (i.e. centerlines, bogart, american racing, weld racing, etc.). Generally, I am looking for 15x3 1/2 or 15x4 front wheels and 15X8 or 15X10 back wheels (5 lug). I have draglites now (15x8 and 15x 31/2, I am not even sure on how much they weigh) and I was looking to get rid of some weight. __________________ Tim Wilson HR/SST 4301

11-25-2008, 03:58 PM	#2
Darrin Christen Member Join Date: Mar 2007 Location: Des Allemands, LA Posts: 365 Likes: 8 Liked 1 Time in 1 Post	Re: Lightweight wheels When I switched from Weld Draglites 3 1/2" front wheels to there Weld Magnum Drag 2.0 one piece 3 1/2" wheels The difference was 7 lbs. lighter per wheel and tire. I weighed the old ones with good year 25" tall tires and the new ones with hoosier 26" tall tires. My wallet was also alot lighter! lol Darrin Christen 4878SST __________________ 4878 SS/GA 66CHEVY II

11-25-2008, 05:12 PM	#4
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Lightweight wheels Your best bet would be to call the manufacturers. But remember that you start compromising strength with some super lightweight wheels. I recall a center breaking out of a wheel when a car turned a corner past the ticket booth at Norwalk years ago (Rink/GTO/Nova???) and an early Camaro leaking air in the staging lanes at Dinwiddie from a stress crack. Holeshot Wheels has a wide variety of styles which are pretty light and with custom offsets. They have also started producing lighter one piece billet fronts which will eventually be available in all of their styles. But you'll need to call for specific weights. www.holeshotwheels.com __________________ LOCOMOTION Racing

11-25-2008, 06:27 PM	#5
Dave Turner VIP Member Join Date: Oct 2005 Location: Schomberg, ON, Canada Posts: 1,222 Likes: 1,606 Liked 364 Times in 138 Posts	Re: Lightweight wheels Myron, what is the history behind Holeshot wheels? Just curious as I had never heard of them until seeing the product on your car - and I work in the aftermarket trade. (Not sure what that says about anything but I have not run into them at trade shows etc.) __________________ Dave Turner SS/GT #1153

11-25-2008, 07:47 PM	#7
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Lightweight wheels Dave, They also go under World Class Machine just north of Daytona Beach, FL. It's a CNC machine shop whos owner is also a car enthusiast that origianlly decided to do wheels on the side. I hooked up with them in 1995 but I'm not clear on the history before then. It is a small wheel business when compared to the "name" brands, but word of mouth, deals with chassis builders, dealers like Harlow Tire, my efforts & others have kept them busy enough to not need much more regular advertising in the past. They have been doing more advertising lately with a few ads in National Dragster in the last few years, been attending some car shows and races, been at the PRI show in Orlando for the last 2 years and will be there again in a couple of weeks. By not getting too big, too fast, they can concentrate more on customer service, quality and do more custom applications & offsets. I've always liked to describe their products as a good balance of weight, strength and price. But they are constantly looking to reduce weight without compromises and have been getting SFI certifications. Their one piece forged front wheels (not sure if "billet" was accurate in my earlier post) is their latest effort to save weight. But their original 3-piece design, still pretty light, also offer the options of offset changes, damaged section replacement, etc. instead of having to buy a whole new wheel. __________________ LOCOMOTION Racing

11-25-2008, 08:46 PM	#8
Dave Turner VIP Member Join Date: Oct 2005 Location: Schomberg, ON, Canada Posts: 1,222 Likes: 1,606 Liked 364 Times in 138 Posts	Re: Lightweight wheels Thanks for the background on Holeshot Myron. I don't know how I missed them at PRI. I've been at all of the Orlando shows. __________________ Dave Turner SS/GT #1153

11-25-2008, 09:02 PM	#9
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Lightweight wheels lol As big as that place is, it's easy to miss a few displays. They were way in the back the first time and are slowly moving up. I wish I had time than just Saturday to spend there. __________________ LOCOMOTION Racing

11-26-2008, 03:34 AM	#10
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: Lightweight wheels When I took the Center-line Convo-pros off my car last spring & put the M/T wheels on it I took 6lbs off the front of the car....( i was thinking it was 6lbs a wheel but that sounds like to much). I went from Hoosier 28 front runners to M/T 27.5 also. __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"