Fuel Sample Valve?

Notch1320 · 12-03-2008, 12:44 AM

Does it matter what location you sample the fuel from? I would like to install a sample valve in the trunk at the fuel cell fitting rather than clutter up the engine bay with more crap in the way when tear down comes up.

bobby · 12-03-2008, 08:26 AM

don't quote me on this, but I think that NHRA wants it as close to the carb as possible. Mainly b/c you can add illegal fuel anywhere between the sample valve and the carb if you wanted to. Their way, they can see if you have any extra lines running to the carb (F.I.).

Chad Rhodes · 12-03-2008, 12:47 PM

I was told that AT, or after the regulator would be fine.

There was a rumor of a SS car a few years ago that was very fast, always pulled a fuel sample from the back of the car, car also had an aluminum fuel cell. Always seemed to be a few of those 5 gallon cans of the NOT LEGAL ERC in his trailer too.............

Tom Goldman · 12-03-2008, 01:06 PM

Rules state "between fuel tank and carb" but I would put it after the regulator and locate it as far from the headers as practical. .....Aeromotive makes a really nice,safe valve for this purpose. ..........I think Bernie Cunningham also used to sell a neat little brass valve for this purpose, I don't know if he still sells them. .....Tom

Philip Saran · 12-03-2008, 01:59 PM

Contact Clark Holroyd, (909) 591-4320 Chino, CA

He sells fuel sample valve that is CNC Billet construction and
also comes in anodized colors.

JHeath · 12-03-2008, 10:11 PM

Yes, under the hood,I have a drain valve in the stock gas tank, that worked well for 5 years, until a Tech guy saw it. I now have a valve on the fuel rail.

12-03-2008, 12:44 AM	#1
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Fuel Sample Valve? Does it matter what location you sample the fuel from? I would like to install a sample valve in the trunk at the fuel cell fitting rather than clutter up the engine bay with more crap in the way when tear down comes up. __________________ Shawn Allsup K/S 718

12-03-2008, 08:26 AM	#2
bobby Member Join Date: Jun 2008 Location: League City, Texas Posts: 243 Likes: 0 Liked 0 Times in 0 Posts	Re: Fuel Sample Valve? don't quote me on this, but I think that NHRA wants it as close to the carb as possible. Mainly b/c you can add illegal fuel anywhere between the sample valve and the carb if you wanted to. Their way, they can see if you have any extra lines running to the carb (F.I.). __________________ Next time wave all of your fingers at me.

12-03-2008, 12:47 PM	#3
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	Re: Fuel Sample Valve? I was told that AT, or after the regulator would be fine. There was a rumor of a SS car a few years ago that was very fast, always pulled a fuel sample from the back of the car, car also had an aluminum fuel cell. Always seemed to be a few of those 5 gallon cans of the NOT LEGAL ERC in his trailer too............. __________________ Chad Rhodes 2113 I/SA

12-03-2008, 01:06 PM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,475 Likes: 887 Liked 865 Times in 235 Posts	Re: Fuel Sample Valve? Rules state "between fuel tank and carb" but I would put it after the regulator and locate it as far from the headers as practical. .....Aeromotive makes a really nice,safe valve for this purpose. ..........I think Bernie Cunningham also used to sell a neat little brass valve for this purpose, I don't know if he still sells them. .....Tom __________________ Tom Goldman 1500 SG , 1506 STK

12-03-2008, 01:59 PM	#5
Philip Saran Senior Member Join Date: Oct 2006 Location: Parker, CO. Posts: 728 Likes: 165 Liked 14 Times in 11 Posts	Re: Fuel Sample Valve? Contact Clark Holroyd, (909) 591-4320 Chino, CA He sells fuel sample valve that is CNC Billet construction and also comes in anodized colors. __________________ Phil Saran Parker, Colorado

12-03-2008, 10:11 PM	#6
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 786 Likes: 2,876 Liked 370 Times in 101 Posts	Re: Fuel Sample Valve? Yes, under the hood,I have a drain valve in the stock gas tank, that worked well for 5 years, until a Tech guy saw it. I now have a valve on the fuel rail. __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"