Help from any FORD racers..

Rich67stang · 12-20-2008, 10:06 AM

I have a svo351 stroked to 435, I ran in IHRA hotrod. It goes 9.34 @ 141 and 10.90 @ 136. It has blue thunder heads. I ran a c-4 from dynamic converters and shifted on time. I shifted third gear on rpm @ 7200.
I have used every SBF combo and to make them run you need alot of comp. and stroke to get them moving off of the stop. My car weighed 2992#. Glen fergueson runs a 351 stroked with yates heads also and he goes 10.90 @ 134. You also need to spin the crap out of that 306,331,347 to run #'s...I build alot of NMRA motors for guys. Your welcome to take my 435 for 10k TK...I am going SS racing. I would put those heads you have on a 4.00 stroke, 4.125 bore motor with a .721 or so lift cam with .270-.280 duration@ .050., super victor intake, mvh spacer,gary stinnet gas carb. Good luck. I will tell you what DOES NOT WORK ON A FORD. lol

SS/EM 161
Quick Rod 161

12-20-2008, 10:06 AM	#5
Rich67stang Member Join Date: Nov 2005 Location: Jackson, NJ Posts: 313 Likes: 3 Liked 116 Times in 27 Posts	Re: Help from any FORD racers.. I have a svo351 stroked to 435, I ran in IHRA hotrod. It goes 9.34 @ 141 and 10.90 @ 136. It has blue thunder heads. I ran a c-4 from dynamic converters and shifted on time. I shifted third gear on rpm @ 7200. I have used every SBF combo and to make them run you need alot of comp. and stroke to get them moving off of the stop. My car weighed 2992#. Glen fergueson runs a 351 stroked with yates heads also and he goes 10.90 @ 134. You also need to spin the crap out of that 306,331,347 to run #'s...I build alot of NMRA motors for guys. Your welcome to take my 435 for 10k TK...I am going SS racing. I would put those heads you have on a 4.00 stroke, 4.125 bore motor with a .721 or so lift cam with .270-.280 duration@ .050., super victor intake, mvh spacer,gary stinnet gas carb. Good luck. I will tell you what DOES NOT WORK ON A FORD. lol SS/EM 161 Quick Rod 161