Help from any FORD racers..

Dave Steltz · 12-20-2008, 11:26 AM

Friend of mine runs a Mustang II with a 302....10.30's I think best times, If I remember right 10.90's at about 126...I believe he runs a 800 holley...Lots of rear gear (5.14's) and keep the 3 speed, and lots of convertor (at least 5800-6000 )...little motors need lots of help getting going on the bottom of the track..

You have lots of head and cam, it needs to run up there in the RPM, you should cross the line at 7500 at least...

Just my .02...

Freddie · 12-20-2008, 06:16 PM

I have not run the mechanical roller in this car yet. The motor has been running with a Motorsport hydrolic roller one of thier F cams.

12-20-2008, 11:26 AM	#1
Dave Steltz Member Join Date: Nov 2003 Posts: 323 Likes: 0 Liked 0 Times in 0 Posts	Re: Help from any FORD racers.. Friend of mine runs a Mustang II with a 302....10.30's I think best times, If I remember right 10.90's at about 126...I believe he runs a 800 holley...Lots of rear gear (5.14's) and keep the 3 speed, and lots of convertor (at least 5800-6000 )...little motors need lots of help getting going on the bottom of the track.. You have lots of head and cam, it needs to run up there in the RPM, you should cross the line at 7500 at least... Just my .02... __________________ Dave Steltz 135G SG/SP/SST BIAECH Racing Team

12-20-2008, 06:16 PM	#2
Freddie Member Join Date: Jul 2005 Location: Tampa Fla / Anderson SC Posts: 334 Likes: 12 Liked 3 Times in 2 Posts	Re: Help from any FORD racers.. I have not run the mechanical roller in this car yet. The motor has been running with a Motorsport hydrolic roller one of thier F cams. __________________ NHRA: Comp 2200 - S/C 2201 NMRA 2012 Outlaw 10.5 #10