shifter in factory console, 3rd Gen Camaro/Firebird

Ron Miller · 01-06-2009, 04:49 PM

I have a B & M Pro Stick mounted in mine with a no cover of course with a SHIF NOIDE mounted behind the shifter. The Pro Stick is almost identical to the 1/4 stick. So mounting will be the same. You will have to make a lower bracket to mount the 1/4 stick shifter body on top of the trans tunnel sheet metal. This all will fit in the center console. I maid my own top cover out of aluminum, painted it with the SEM plastic satin black paint. I also had to make a extension for the reverse lever. Its doable if you all ready have a 1/4 stick. Its easier that it sounds to mount it. Mock it up first and you will see what it takes. Send me a e-mail rmiller249@comcast.net. I can take a picture of my set up for you and send it back.

Ron Miller 92Camaro GT/DA 3287
Brownstown, Mi

01-06-2009, 04:49 PM	#3
Ron Miller Member Join Date: Mar 2002 Location: Brownstown, Mi 48134 Posts: 196 Likes: 35 Liked 13 Times in 7 Posts	Re: shifter in factory console, 3rd Gen Camaro/Firebird I have a B & M Pro Stick mounted in mine with a no cover of course with a SHIF NOIDE mounted behind the shifter. The Pro Stick is almost identical to the 1/4 stick. So mounting will be the same. You will have to make a lower bracket to mount the 1/4 stick shifter body on top of the trans tunnel sheet metal. This all will fit in the center console. I maid my own top cover out of aluminum, painted it with the SEM plastic satin black paint. I also had to make a extension for the reverse lever. Its doable if you all ready have a 1/4 stick. Its easier that it sounds to mount it. Mock it up first and you will see what it takes. Send me a e-mail rmiller249@comcast.net. I can take a picture of my set up for you and send it back. Ron Miller 92Camaro GT/DA 3287 Brownstown, Mi