Help a super stock rookie

motohead1 · 05-01-2009, 02:14 PM

Hey guys:

Great website, and the people on it.
I have a car in progress that was going to be a ET or S/ST car, but now we have the super stock bug. The class we are trying to fit it into is SS/CS. The car is a 67 Chevy II that was mini tubed some years back. The max tire size that will fit is 10.5 x 30R 15. It has ladder bars, and floater setup on mono leafs. We are doing a roll bar to cage add on as we speak. I know this is not the way to go, but its what we have to work with.

My question is do you think we have any chance of making this car work with this setup?

Also, the class is a iron head class and we intend to use iron bowtie SBC heads. what cubic inch engine would you go with. we have a 363 inch combo now that we could put the bowties on, but Im not sure these heads can be made to feed that big of motor a high RPM.

Last question, who is the man for the job as far as porting the iron bowties.

Thanks, Chuck

RJ · 05-01-2009, 06:01 PM

Quote:

Originally Posted by motohead1

Last question, who is the man for the job as far as porting the iron bowties.

Whoever ports the heads on the Mans SS/CS is doing a good job.

keith ohanesian · 05-01-2009, 06:20 PM

Call Rick Waters at 623 780 8778. Your cid is a little to big, you would be carrying way to much weight. Drop it into the teens or twenties. Call Bob Book @ 815 464 7200 and he will send you a great carb. These guys both know there **** Rick builds some of the fastest comp motors ,Bob has the best carbs and builds some of the fastest pro stock motors out there. Both very smart people and are glad to shoot the **** with you to help you out.

Joe Abbazia · 05-01-2009, 06:30 PM

Keith do you shoot the **** on your bosses time?he was doing alot of complaining at atco.

keith ohanesian · 05-01-2009, 07:32 PM

Joe I have NO boss U should know that

motohead1 · 05-01-2009, 08:01 PM

Thanks for the info so far. No comments on the tire size or the lack of a 4 link?

ssheadcutter · 06-04-2009, 05:40 PM

I have done several sets of the old Iron Bowties including welding and reconfiguring the exhaust port and changing valve angles a little. Go to my website at www.headbytes.com I can feed 363 inches with those heads NO PROBLEM!!!

05-01-2009, 02:14 PM	#1
motohead1 Junior Member Join Date: Apr 2009 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Help a super stock rookie Hey guys: Great website, and the people on it. I have a car in progress that was going to be a ET or S/ST car, but now we have the super stock bug. The class we are trying to fit it into is SS/CS. The car is a 67 Chevy II that was mini tubed some years back. The max tire size that will fit is 10.5 x 30R 15. It has ladder bars, and floater setup on mono leafs. We are doing a roll bar to cage add on as we speak. I know this is not the way to go, but its what we have to work with. My question is do you think we have any chance of making this car work with this setup? Also, the class is a iron head class and we intend to use iron bowtie SBC heads. what cubic inch engine would you go with. we have a 363 inch combo now that we could put the bowties on, but Im not sure these heads can be made to feed that big of motor a high RPM. Last question, who is the man for the job as far as porting the iron bowties. Thanks, Chuck

05-01-2009, 06:20 PM	#3
keith ohanesian Member Join Date: Mar 2006 Posts: 392 Likes: 0 Liked 1 Time in 1 Post	Re: Help a super stock rookie Call Rick Waters at 623 780 8778. Your cid is a little to big, you would be carrying way to much weight. Drop it into the teens or twenties. Call Bob Book @ 815 464 7200 and he will send you a great carb. These guys both know there ** Rick builds some of the fastest comp motors ,Bob has the best carbs and builds some of the fastest pro stock motors out there. Both very smart people and are glad to shoot the ** with you to help you out. __________________ No prep is king

05-01-2009, 06:30 PM	#4
Joe Abbazia Junior Member Join Date: Aug 2005 Location: USA Posts: 66 Likes: 0 Liked 19 Times in 4 Posts	Re: Help a super stock rookie Keith do you shoot the **** on your bosses time?he was doing alot of complaining at atco.

05-01-2009, 07:32 PM	#5
keith ohanesian Member Join Date: Mar 2006 Posts: 392 Likes: 0 Liked 1 Time in 1 Post	Re: Help a super stock rookie Joe I have NO boss U should know that __________________ No prep is king

05-01-2009, 08:01 PM	#6
motohead1 Junior Member Join Date: Apr 2009 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Re: Help a super stock rookie Thanks for the info so far. No comments on the tire size or the lack of a 4 link?

06-04-2009, 05:40 PM	#7
ssheadcutter Junior Member Join Date: Jun 2009 Location: Nashville, TN Posts: 3 Likes: 0 Liked 0 Times in 0 Posts	Re: Help a super stock rookie I have done several sets of the old Iron Bowties including welding and reconfiguring the exhaust port and changing valve angles a little. Go to my website at www.headbytes.com I can feed 363 inches with those heads NO PROBLEM!!!