best head for 1972 chevy

novassdude · 11-10-2009, 01:24 PM

What is the best head to use on the 1972 200hp 350 chevy? This is for a stocker application.

Adger Smith · 11-10-2009, 02:33 PM

993,487,881,882 appear to be the heads listed in the NHRA guide
CC vol listed in NHRA Super Stock Cyl. vol. list
---993 161 65
---487 161 65
---881 160 60
---882 160 60
I would say 993 or 487
check out the optional cam and piston choices listed :
* = Optional cam lift 401/410
Note A = J.E. #161757 piston uses an .080” dish, TRW #L2403N piston uses a .065 depth and CP #C14-CP piston has a depth of .092. All volumes OK.
You did want to know what NHRA legal head fit the 200 hp 350 engine?

novassdude · 11-10-2009, 02:49 PM

Yes Adger That is what I am looking for. I was woundering if any one has a tendency to out flow the others. I did know about the optional cam that is part of the reason for looking at this one.

Dave Ley · 11-10-2009, 06:06 PM

The 487X is the best choice.

greg fulk · 11-10-2009, 07:03 PM

I'll 2nd that. Have very good luck out of the 487 over the years.

11-11-2009, 11:59 AM

From working and flow testing all of them back to back. All of the casting can flow exactly the same when the same work, valves and valve jobs are used. The smaller exhaust ports make more power. The 487X works better with larger cubic inch motors (350 and above). I hope this helps.

Best Regards,

Chris Hardy
chrishardy@racingenginetechnologies.com
231-773-7252

11-10-2009, 02:33 PM	#2
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: best head for 1972 chevy 993,487,881,882 appear to be the heads listed in the NHRA guide CC vol listed in NHRA Super Stock Cyl. vol. list ---993 161 65 ---487 161 65 ---881 160 60 ---882 160 60 I would say 993 or 487 check out the optional cam and piston choices listed : * = Optional cam lift 401/410 Note A = J.E. #161757 piston uses an .080” dish, TRW #L2403N piston uses a .065 depth and CP #C14-CP piston has a depth of .092. All volumes OK. You did want to know what NHRA legal head fit the 200 hp 350 engine? __________________ Adger Smith (Former SS)

11-10-2009, 02:49 PM	#3
novassdude Senior Member Join Date: Mar 2002 Location: usa Posts: 752 Likes: 204 Liked 136 Times in 49 Posts	Re: best head for 1972 chevy Yes Adger That is what I am looking for. I was woundering if any one has a tendency to out flow the others. I did know about the optional cam that is part of the reason for looking at this one.

11-10-2009, 06:06 PM	#4
Dave Ley Member Join Date: May 2008 Location: South Jersey , The 51st. State Posts: 424 Likes: 1,799 Liked 241 Times in 44 Posts	Re: best head for 1972 chevy The 487X is the best choice. __________________ Dave Ley

11-10-2009, 07:03 PM	#5
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: best head for 1972 chevy I'll 2nd that. Have very good luck out of the 487 over the years. __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

11-11-2009, 11:59 AM	#6
Chris Hardy Guest Posts: n/a	Re: best head for 1972 chevy From working and flow testing all of them back to back. All of the casting can flow exactly the same when the same work, valves and valve jobs are used. The smaller exhaust ports make more power. The 487X works better with larger cubic inch motors (350 and above). I hope this helps. Best Regards, Chris Hardy chrishardy@racingenginetechnologies.com 231-773-7252

11-10-2009, 01:24 PM	#1
novassdude Senior Member Join Date: Mar 2002 Location: usa Posts: 752 Likes: 204 Liked 136 Times in 49 Posts	best head for 1972 chevy What is the best head to use on the 1972 200hp 350 chevy? This is for a stocker application.