Attention: Top Sportsman

John Moore · 01-19-2010, 05:35 AM

This is in the 2010 Rulebook !

Monday, January 18, 2010

Attention all Top Sportsman competitors. As a reminder from the Technical Services Department on page 4.14 of the 2010 NHRA Rulebook, DRIVELINE: 2, DRIVELINE, “Each end of driveshaft must have round 360-degree driveshaft loops within 6 inches of U-joints.” Be sure to check that BOTH ends of the driveshaft have a 360-degree loop within 6-inches of the front and rear U-joints. If you have any questions regarding this rule please contact the Tech Department at 626-250-2485 or TechDL@nhra.com.

Keyword here is BOTH ends of the driveshaft.

Looks like Bickel has a nice set-up for the 9 inch Ford pinion support rear ends.

http://www.jerrybickel.com/driveshaf...enclosure.html

It is only $ 395.00 --

Funny thing is , this is for T/S Only , not comp, SS or any other sportsman class.

01-19-2010, 05:35 AM	#1
John Moore Junior Member Join Date: Jun 2002 Location: Kansas Posts: 13 Likes: 0 Liked 0 Times in 0 Posts	Attention: Top Sportsman This is in the 2010 Rulebook ! Monday, January 18, 2010 Attention all Top Sportsman competitors. As a reminder from the Technical Services Department on page 4.14 of the 2010 NHRA Rulebook, DRIVELINE: 2, DRIVELINE, “Each end of driveshaft must have round 360-degree driveshaft loops within 6 inches of U-joints.” Be sure to check that BOTH ends of the driveshaft have a 360-degree loop within 6-inches of the front and rear U-joints. If you have any questions regarding this rule please contact the Tech Department at 626-250-2485 or TechDL@nhra.com. Keyword here is BOTH ends of the driveshaft. Looks like Bickel has a nice set-up for the 9 inch Ford pinion support rear ends. http://www.jerrybickel.com/driveshaf...enclosure.html It is only $ 395.00 -- Funny thing is , this is for T/S Only , not comp, SS or any other sportsman class. __________________ John Moore ET 521,S/G 5212,T/S 521