Rocker Clarification is up!!!

ron mattson · 01-19-2012, 06:27 PM

Go to nhra competition rules ammendments!!!!

Woodro Josey · 01-19-2012, 07:59 PM

I would say that clears up a lot of questions!

new az stocker · 01-19-2012, 08:20 PM

do the roller rockers have to be steel or is aluminum ok?

Lew Silverman · 01-19-2012, 08:56 PM

I think they still need to add one line -

Aftermarket rocker arms must have same ratio as OEM for engine horsepower claimed

or

OEM or Aftermarket rocker arms with any ratio permitted

I do like the new rule about being able to reinforce an OEM steel rocker arm!

Lew

Greg Reimer 7376 · 01-19-2012, 10:34 PM

Anybody have a brand name and part number? It would be nice to see what we need to buy.

Pat Cook · 01-19-2012, 11:55 PM

http://www.nhra.com/UserFiles/file/2...01-19-2012.pdf

Alan Roehrich · 01-20-2012, 12:07 AM

Quote:

Originally Posted by Greg Reimer 7376

Anybody have a brand name and part number? It would be nice to see what we need to buy.

Those, if they're going to be listed, would be in the "Accepted Products" list.

As of just now, there is no rocker arm category listed.

Lew Silverman · 01-20-2012, 09:23 AM

So if I show up with Harlan Sharp 1.7 roller rockers on my 327 I'm OK? Are they going to check the ratio?

Still a lot of "what if's"!

Lew

Signman · 01-20-2012, 10:21 AM

Rocker Ratio is defined in your Engine Specifications in the guide.

ron mattson · 01-20-2012, 10:37 AM

I spoke to Nhra tech last friday and was told stock ratio, dont know why its not
on the new ammendment. As pointed out earlier it is in the engine blueprints and
probably why nothing has changed ratio wise. I was also told there will not be a accepted
or required list, Any commercially available unit that fits the outlined requirements
will be just fine.

01-19-2012, 06:27 PM	#1
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 465 Likes: 17 Liked 66 Times in 29 Posts	Rocker Clarification is up!!! Go to nhra competition rules ammendments!!!! __________________ Ron Mattson 5015 STK

01-19-2012, 07:59 PM	#2
Woodro Josey Senior Member Join Date: Jul 2007 Posts: 805 Likes: 0 Liked 3 Times in 1 Post	Re: Rocker Clarification is up!!! I would say that clears up a lot of questions! __________________ Woodro Josey 2002 STK

01-19-2012, 08:20 PM	#3
new az stocker Junior Member Join Date: Jul 2011 Posts: 20 Likes: 0 Liked 0 Times in 0 Posts	Re: Rocker Clarification is up!!! do the roller rockers have to be steel or is aluminum ok? Last edited by new az stocker; 01-19-2012 at 08:23 PM.

01-19-2012, 08:56 PM	#4
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: Rocker Clarification is up!!! I think they still need to add one line - Aftermarket rocker arms must have same ratio as OEM for engine horsepower claimed or OEM or Aftermarket rocker arms with any ratio permitted I do like the new rule about being able to reinforce an OEM steel rocker arm! Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA

01-19-2012, 10:34 PM	#5
Greg Reimer 7376 VIP Member Join Date: Nov 2008 Location: Glendora,Calif. Posts: 1,134 Likes: 172 Liked 704 Times in 218 Posts	Re: Rocker Clarification is up!!! Anybody have a brand name and part number? It would be nice to see what we need to buy.

01-19-2012, 11:55 PM	#6
Pat Cook Member Join Date: Jun 2002 Posts: 175 Likes: 0 Liked 0 Times in 0 Posts	Re: Rocker Clarification is up!!! http://www.nhra.com/UserFiles/file/2...01-19-2012.pdf __________________ 67 Ford Fairlane F/SA 749

01-20-2012, 09:23 AM	#8
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: Rocker Clarification is up!!! So if I show up with Harlan Sharp 1.7 roller rockers on my 327 I'm OK? Are they going to check the ratio? Still a lot of "what if's"! Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA

01-20-2012, 10:21 AM	#9
Signman Senior Member Join Date: Oct 2003 Location: Lower Slower Delaware Posts: 535 Likes: 22 Liked 269 Times in 99 Posts	Re: Rocker Clarification is up!!! Rocker Ratio is defined in your Engine Specifications in the guide. __________________ Frank Ferrucci I/SA 1271 "Be Thankful for the Gifts You are Given"

01-20-2012, 10:37 AM	#10
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 465 Likes: 17 Liked 66 Times in 29 Posts	Re: Rocker Clarification is up!!! I spoke to Nhra tech last friday and was told stock ratio, dont know why its not on the new ammendment. As pointed out earlier it is in the engine blueprints and probably why nothing has changed ratio wise. I was also told there will not be a accepted or required list, Any commercially available unit that fits the outlined requirements will be just fine. __________________ Ron Mattson 5015 STK Last edited by ron mattson; 01-20-2012 at 10:39 AM. Reason: changes