Which slicks for a stick car??

Philip Saran · 04-05-2013, 04:08 PM

My buddy has a 1967 Barracuda Noch with 360/4 speed/8-3/4 w/4:10's
motor has 11:50 to 1 compression Edelbrock heads, air-gap intake and
Holley 750 carb. ITT headers and exhaust, Cal-tracks with with Chyrsler
spings at this point. Car weights about 3500 with driver.

On dyno car makes 380 HP to rear tires.

On MT street drag radials car with 1/8th mile 8.0's at about 94 MPH.
tires are 275/60/15 run at 15-16 pounds.

Called MT tire rep and he says MT street radials will not work with a
stick car.

So what brand, size drag slick do the stick racers recommend??

Open to opinions and comments

04-05-2013, 04:08 PM	#1
Philip Saran Senior Member Join Date: Oct 2006 Location: Parker, CO. Posts: 727 Likes: 160 Liked 14 Times in 11 Posts	Which slicks for a stick car?? My buddy has a 1967 Barracuda Noch with 360/4 speed/8-3/4 w/4:10's motor has 11:50 to 1 compression Edelbrock heads, air-gap intake and Holley 750 carb. ITT headers and exhaust, Cal-tracks with with Chyrsler spings at this point. Car weights about 3500 with driver. On dyno car makes 380 HP to rear tires. On MT street drag radials car with 1/8th mile 8.0's at about 94 MPH. tires are 275/60/15 run at 15-16 pounds. Called MT tire rep and he says MT street radials will not work with a stick car. So what brand, size drag slick do the stick racers recommend?? Open to opinions and comments __________________ Phil Saran Parker, Colorado