sb chevy head welding

Glenn Briglio · 01-02-2019, 04:18 PM

Need some ideas for filling in water trough sb chevy deck surface by spark plugs.

Bob Lasko · 01-02-2019, 05:46 PM

use torch with braze then mill or sand down. have this in my heads.
Bob Lasko

Bob Lasko · 01-02-2019, 05:54 PM

as you can see from the picture the braze was added into the spark plug cool holes and then milled.
Bob Lasko

MAURICE BLENDHEIM · 01-02-2019, 10:53 PM

Glenn…I have used BELZONA 1511 over the years. It is expensive but fast, functional, you can do it on the dining room table and machine or sand it in 24 hours. Once you buy it you'll be fixing the impossible with success. Hope this helps. Maurice.

01-02-2019, 04:18 PM	#1
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,281 Likes: 1,890 Liked 969 Times in 307 Posts	sb chevy head welding Need some ideas for filling in water trough sb chevy deck surface by spark plugs. __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.

01-02-2019, 05:46 PM	#2
Bob Lasko Senior Member Join Date: Jan 2002 Location: Wilton,CT Posts: 628 Likes: 0 Liked 185 Times in 54 Posts	Re: sb chevy head welding use torch with braze then mill or sand down. have this in my heads. Bob Lasko

01-02-2019, 05:54 PM	#3
Bob Lasko Senior Member Join Date: Jan 2002 Location: Wilton,CT Posts: 628 Likes: 0 Liked 185 Times in 54 Posts	Re: sb chevy head welding as you can see from the picture the braze was added into the spark plug cool holes and then milled. Bob Lasko Attached Thumbnails

01-02-2019, 10:53 PM	#4
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 567 Likes: 306 Liked 278 Times in 86 Posts	Re: sb chevy head welding Glenn…I have used BELZONA 1511 over the years. It is expensive but fast, functional, you can do it on the dining room table and machine or sand it in 24 hours. Once you buy it you'll be fixing the impossible with success. Hope this helps. Maurice.