Wheel stand camber

Camarob859 · 09-16-2019, 09:32 AM

Got a 69 camaro 255/350
I’d like to reduce the amount of camber that happens when fronts are off the ground , most stockers I see do not have excessive negative camber during a wheel stand I’ve thought of trying tall upper ball joints but not 100% sure that’s all that needs to be done.

Rich Biebel · 09-16-2019, 01:47 PM

Jack Arnew from the Baltimore area is/was the man when it comes to fixing that problem. Upper A-frame mods along with other changes was what most people did.

The last 1-2 inches of up travel is when the camber goes extremely negative.

If you limit front end up travel, you get rid of a lot of that camber change....

09-16-2019, 09:32 AM	#1
Camarob859 Junior Member Join Date: Jul 2010 Posts: 52 Likes: 4 Liked 8 Times in 3 Posts	Wheel stand camber Got a 69 camaro 255/350 I’d like to reduce the amount of camber that happens when fronts are off the ground , most stockers I see do not have excessive negative camber during a wheel stand I’ve thought of trying tall upper ball joints but not 100% sure that’s all that needs to be done.

09-16-2019, 01:47 PM	#2
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: Wheel stand camber Jack Arnew from the Baltimore area is/was the man when it comes to fixing that problem. Upper A-frame mods along with other changes was what most people did. The last 1-2 inches of up travel is when the camber goes extremely negative. If you limit front end up travel, you get rid of a lot of that camber change.... __________________ Rich Biebel S/C 1479 Stock 147R