Wheelie bar Question

Chad Rhodes · 11-11-2007, 02:02 PM

What size and thickness tubing are most people using to build wheelie bars for a stocker/superstocker. This is not a conventional application, so an off the shelf kit will not work

Tom Goldman · 11-12-2007, 06:52 PM

Chad , Typical size for most wheelie bar tubes is 7/8" or 1" .065" chromemoly .This wall thickness will hold up well on a sprung 48" bar. Tom

11-11-2007, 02:02 PM	#1
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	Wheelie bar Question What size and thickness tubing are most people using to build wheelie bars for a stocker/superstocker. This is not a conventional application, so an off the shelf kit will not work __________________ Chad Rhodes 2113 I/SA

11-12-2007, 06:52 PM	#2
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,468 Likes: 875 Liked 838 Times in 232 Posts	Re: Wheelie bar Question Chad , Typical size for most wheelie bar tubes is 7/8" or 1" .065" chromemoly .This wall thickness will hold up well on a sprung 48" bar. Tom __________________ Tom Goldman 1500 SG , 1506 STK