|
|
04-30-2021, 04:12 PM
|
#1 |
|
Member
Join Date: Mar 2003
Location: MA.
Posts: 287
Likes: 151
Liked 150 Times in 41 Posts
|
LT1 Alternator & Bracket
I need to buy a new setup. What is everyone using for a low mount alternator and bracket on Fuel injected LT1 Thanks Jim
|
|
|
|
04-30-2021, 04:29 PM
|
#2 |
|
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 908
Likes: 70
Liked 238 Times in 113 Posts
|
Re: LT1 Alternator & Bracket
I was able to remake the existing bracket and put the alternator where the A/C compressor was . Also reworked a power steering pulley from a Quad4 to fit the alternator . Worked well and still used the LT1 belt tensioner .
|
|
|
|
|
04-30-2021, 08:03 PM
|
#3 |
|
Senior Member
Join Date: Mar 2002
Location: Warsaw, Mo
Posts: 719
Likes: 637
Liked 1,141 Times in 354 Posts
|
Re: LT1 Alternator & Bracket
Your better off making your own if you want it to fit right, paid over $100 for one and the pitman arm hit the alternator. Was able to modify it and make it work.
Randy Wells I/S 5628 |
|
|
|
|
05-01-2021, 11:03 PM
|
#4 |
|
Junior Member
Join Date: Oct 2015
Posts: 27
Likes: 10
Liked 6 Times in 4 Posts
|
Re: LT1 Alternator & Bracket
Jim:
I bought one from East Coast, but as it came would not clear the opti spark and sat too far back and would not line up with the pulley on the harmonic balancer. I ended up fabricating spacers using 1”+ diameter aluminum. I can take some photos and pass them along if you like? |
|
|
|
|
05-02-2021, 08:32 PM
|
#5 | |
|
Member
Join Date: Mar 2003
Location: MA.
Posts: 287
Likes: 151
Liked 150 Times in 41 Posts
|
Re: LT1 Alternator & Bracket
Quote:
|
|
|
|
|
|
05-04-2021, 10:26 PM
|
#6 | |
|
Junior Member
Join Date: Oct 2015
Posts: 27
Likes: 10
Liked 6 Times in 4 Posts
|
Re: LT1 Alternator & Bracket
Quote:
|
|
|
|
|
 |
|
|
Linear Mode
