HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Class Racer Builds

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-13-2014, 08:15 AM   #11
HandOverFist
VIP Member
 
HandOverFist's Avatar
 
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
Default Re: '67 Camaro E/SA redo

Quote:
Originally Posted by brent flynn View Post
Most people say that the 92.5 is the faster tire....why you wanna go with 94"? Gearing? Im probably goin with a 92.5, so i can gain some clearance, and worse case, i go back the 4.30 gear... are your 92.5 tires about worn out? I would like to pick up a good used set, to try on the car...
When I cut the blocks it raised the rear a bit as you can see in the pic's. It is buzzing the motor pretty good now with the 5.14 gear and 92.5 tires...figure I can accomplish two goals at once with the tire change. Current tires are fresh so it will likely be next season before the swap. I do have the previous set which have only around 50 passes on them if you would like to try.

Before block cut -



After -

__________________
Rich Taylor
I/SA - 321
HandOverFist is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.