Ford vs Chevy Build-up

Sean Marconette · 11-17-2014, 12:46 PM

Hedman makes a good set. My first set lasted 16 years and those were coated after test fitting and making clearances. The tubes at the flange started cracking. They were 1 5/8 with 2 3/4 collectors. My new Hedmans are 1 5/8 and 1 3/4 with 3" collectors. No need to cut headers up. They are not cheap but they fit. With the port layout and the close proximity of the header bolts, some tubes you have to ding to get the bolts to fit.

Sean

11-17-2014, 12:46 PM	#40
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 797 Liked 275 Times in 76 Posts	Re: Ford vs Chevy Build-up Hedman makes a good set. My first set lasted 16 years and those were coated after test fitting and making clearances. The tubes at the flange started cracking. They were 1 5/8 with 2 3/4 collectors. My new Hedmans are 1 5/8 and 1 3/4 with 3" collectors. No need to cut headers up. They are not cheap but they fit. With the port layout and the close proximity of the header bolts, some tubes you have to ding to get the bolts to fit. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode