Who makes the best Std size BBC lifters?

Tom Goldman · 05-29-2012, 08:34 AM

Carl, you're correct on the lifter clearance with Comp 819 lifters......Usually .003"+ clearance on a stock block.
The Comp 819's are really good for the money ,but I'd definately have the bores trued oversize for either .874" or .904"
I recently changed a set of Morells and found the circlip groove was chipping away on several lifters. ....First time I've seen it happen on them.
I have a set of Comp Elite lifters for a Comp engine I'm doing, very nice pieces with extreemly large axles that are double pinned in place.

05-29-2012, 08:34 AM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 892 Liked 883 Times in 237 Posts	Re: Who makes the best Std size BBC lifters? Carl, you're correct on the lifter clearance with Comp 819 lifters......Usually .003"+ clearance on a stock block. The Comp 819's are really good for the money ,but I'd definately have the bores trued oversize for either .874" or .904" I recently changed a set of Morells and found the circlip groove was chipping away on several lifters. ....First time I've seen it happen on them. I have a set of Comp Elite lifters for a Comp engine I'm doing, very nice pieces with extreemly large axles that are double pinned in place. __________________ Tom Goldman 1500 SG , 1506 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode