|
|
10-04-2009, 01:13 PM
|
#2 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,125
Likes: 1,583
Liked 1,880 Times in 422 Posts
|
Re: Adjusting valves on cold engine
For cold valve lash, for the first time start up:
With an iron block and iron heads, I set mine about 0.004" to 0.006" loose. With an iron block and aluminum heads, I set mine about 0.006" tight. Hope that helps.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
Threaded Mode