Clutch fork.

terry1 · 02-01-2010, 06:28 PM

I am updating my clutch setup and was wondering if there is a clutch fork out there that is head and shoulders above the rest.I've been using the Lakewood 15500 piece(Small block in '79 Camaro).
Is there any one using anything that would be an improvement;or is an improvement really necessary?

Stick Racing · 02-01-2010, 07:29 PM

Quote:

Originally Posted by terry1

I am updating my clutch setup and was wondering if there is a clutch fork out there that is head and shoulders above the rest.I've been using the Lakewood 15500 piece(Small block in '79 Camaro).
Is there any one using anything that would be an improvement;or is an improvement really necessary?

I've always used the factory GM piece. The Lakewood is good but it is thicker-which sometimes runs into clearance problems.

_____________________________
Andy Stone 1102 A/S 1112 SS/C

55 Chevy · 02-02-2010, 01:37 AM

I use the clutch fork for the 64-81 corvette. It is quite a hefty piece & uses a pin instead of the ball.

rx dealer · 02-02-2010, 09:46 AM

I use the 64-81 corvette fork and it's still available new from any G.M dealer

Greg Barsamian · 02-02-2010, 12:01 PM

X3 on the Corvette clutch fork........ With a pin retaining the rod to the fork, leaves no chance for the Rod to accidently drop out!

terry1 · 02-02-2010, 02:43 PM

Would you happen to know the GM part # for that 64-81 Corvette fork?

rx dealer · 02-02-2010, 08:21 PM

Try G.M part # 3887177 it's the one in my car...Luke SS 311

terry1 · 02-03-2010, 08:53 AM

Thankyou Luke, for the number,
Terry.

02-01-2010, 06:28 PM	#1
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Clutch fork. I am updating my clutch setup and was wondering if there is a clutch fork out there that is head and shoulders above the rest.I've been using the Lakewood 15500 piece(Small block in '79 Camaro). Is there any one using anything that would be an improvement;or is an improvement really necessary?

02-02-2010, 01:37 AM	#3
55 Chevy Member Join Date: Feb 2008 Location: Calgary,Alberta area Posts: 228 Likes: 23 Liked 16 Times in 14 Posts	Re: Clutch fork. I use the clutch fork for the 64-81 corvette. It is quite a hefty piece & uses a pin instead of the ball.

02-02-2010, 09:46 AM	#4
rx dealer Member Join Date: Mar 2007 Location: Lake Orion, Michigan Posts: 337 Likes: 12 Liked 53 Times in 13 Posts	Re: Clutch fork. I use the 64-81 corvette fork and it's still available new from any G.M dealer

02-02-2010, 12:01 PM	#5
Greg Barsamian VIP Member Join Date: Jan 2002 Location: Central Massachusetts Posts: 1,398 Likes: 714 Liked 410 Times in 94 Posts	Re: Clutch fork. X3 on the Corvette clutch fork........ With a pin retaining the rod to the fork, leaves no chance for the Rod to accidently drop out!

02-02-2010, 02:43 PM	#6
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Clutch fork. Would you happen to know the GM part # for that 64-81 Corvette fork?

02-02-2010, 08:21 PM	#7
rx dealer Member Join Date: Mar 2007 Location: Lake Orion, Michigan Posts: 337 Likes: 12 Liked 53 Times in 13 Posts	Re: Clutch fork. Try G.M part # 3887177 it's the one in my car...Luke SS 311

02-03-2010, 08:53 AM	#8
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Clutch fork. Thankyou Luke, for the number, Terry.