HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-01-2010, 05:37 PM   #17
Jeff Lee
VIP Member
 
Jeff Lee's Avatar
 
Join Date: Jul 2007
Location: Anthem, Arizona
Posts: 2,766
Likes: 0
Liked 3 Times in 3 Posts
Default Re: oil retention devices

Vic Santos,
I agree with you, below is what I posted on this subject earlier on post #44:

Quote:
Originally Posted by Jeff Lee View Post
Another issue I have not seen addressed is oil temperatures. This often does not relate to the bracket or Super Class racers as they are not "typically" running as us; the "performance based class racers".
I think you'll find a lot of the former running 50wt oils and changing the oil once or twice a season. The later will often run 10 wt oils and change it as often as every race. But maintenence, although an issue, is not the real concern I have, it's oil temperatures. Personally, per my engine builder, I don't want to see oil temps above 150 degrees based on the oil and clearances I have in the engine. He says if it hits 200 degrees, park the car until it drops. Even if it means loosing a round. Some may have a differing opinion but it's my engine and that's what I go by so I really don't care what Smokey Yunick said 30 years ago. Hardblock or similar products retain heat already.
Call it a diaper, call it a blanket, but no matter what, it's serves to retain heat in the oil pan. I see no way around this. I'd like an independent party to analyze the change in oil temp and the amount of time to cool down with a blanket as opposed to without a diaper.
And I'm with everybody else on this, I see no problem in the class. The issue in the sportsman ranks is the classes that seldom maintain their engines and continue to race when performance is suffering. A Super or Top racer that slows two tenths is more likely to adjust the throttle stop or ad more NOS than to pull the pan and inspect the engine. That always leads to trouble.
I'm sending this post to the S/SS committee
Tech@nhra.com
Racer 6x64,
Another prior post from a Division S/SS representative went something like this....If you are not a registered NHRA member with a current S/SS number, your opinion is not wanted by NHRA.
__________________
Jeff Lee 7494 D/S '70 AMX
Jeff Lee is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.