New Holley replacment carb.

Mike Fuller · 06-30-2010, 09:37 AM

I dont see this posted anywhere on NHRA's site. Is this info correct?
Travis, what do you know about this?

http://www.competitionplus.com/index...-stockss-legal

SSDiv6 · 06-30-2010, 09:43 AM

Quote:

Originally Posted by Mike Fuller

I dont see this posted anywhere on NHRA's site. Is this info correct?
Travis, what do you know about this?

http://www.competitionplus.com/index...-stockss-legal

Interesting...if anyone was to make the same modifications to their current Holly carb, they would be tossed immediately.

LXguy · 06-30-2010, 10:09 AM

The carb pictured is from their Hot Rod series I believe. I don't know what the actual carb discussed in the article looks like.

I'd have to assume it doesn't really have screw in bleeds or an aluminum body!

Duane Eiskant II · 06-30-2010, 10:45 AM

Or the 4 corner idle system...Well, depending on who you are, you can get away with it on your current setup...Maybe its who you know in tech when they look at the carb?

Woodro Josey · 06-30-2010, 11:28 AM

This Carburator does have the screw in air bleeds and Technically not 4 corner idol. If you have any questions about this Carb, call Phillip Vickous at
270-793-0900. Thanks

Duane Eiskant II · 06-30-2010, 11:51 AM

Woodro, what do they do? get it close cut the screws off and silicone over the holes? LOL

vic guilmino · 07-01-2010, 07:23 PM

where is this on the nhra page

LXguy · 07-02-2010, 09:07 AM

So, just to clarify...

I get to dig through junkpiles and Ebay looking for a one-year-only POS Rochester 2bbl, and then try to figure out how to make it work, and what I can and can't do to it, but there's some combination that can just call up Quickfuel and order up a new-tech brandy new aluminum carb?

That seems pretty whack to me. I'm just sayin'.

PS Not faulting Quickfuel, they make awesome stuff.

Bob Pagano · 07-02-2010, 11:15 AM

LX you do know you do not need to run the right # carb dont you ? can be any # as long as it is the proper cfm and the throttle plates measures the same as original.

LXguy · 07-02-2010, 12:55 PM

Bob:

I did not know that. Thanks!

I'm sure that will make the task easier. Does NHRA have those measurements somewhere?

Steve

06-30-2010, 09:37 AM	#1
Mike Fuller Senior Member Join Date: Jun 2007 Posts: 949 Likes: 553 Liked 196 Times in 77 Posts	New Holley replacment carb. I dont see this posted anywhere on NHRA's site. Is this info correct? Travis, what do you know about this? http://www.competitionplus.com/index...-stockss-legal __________________ Mike Fuller 396 STK

06-30-2010, 10:09 AM	#3
LXguy Junior Member Join Date: Jun 2010 Location: Champaign, IL Posts: 40 Likes: 0 Liked 0 Times in 0 Posts	Re: New Holley replacment carb. The carb pictured is from their Hot Rod series I believe. I don't know what the actual carb discussed in the article looks like. I'd have to assume it doesn't really have screw in bleeds or an aluminum body!

06-30-2010, 10:45 AM	#4
Duane Eiskant II Senior Member Join Date: Dec 2001 Location: Alexandria, Va Posts: 501 Likes: 261 Liked 57 Times in 33 Posts	Re: New Holley replacment carb. Or the 4 corner idle system...Well, depending on who you are, you can get away with it on your current setup...Maybe its who you know in tech when they look at the carb? __________________ Duane Eiskant 1354 Stock/Super Stock

06-30-2010, 11:28 AM	#5
Woodro Josey Senior Member Join Date: Jul 2007 Posts: 805 Likes: 0 Liked 3 Times in 1 Post	Re: New Holley replacment carb. This Carburator does have the screw in air bleeds and Technically not 4 corner idol. If you have any questions about this Carb, call Phillip Vickous at 270-793-0900. Thanks __________________ Woodro Josey 2002 STK

06-30-2010, 11:51 AM	#6
Duane Eiskant II Senior Member Join Date: Dec 2001 Location: Alexandria, Va Posts: 501 Likes: 261 Liked 57 Times in 33 Posts	Re: New Holley replacment carb. Woodro, what do they do? get it close cut the screws off and silicone over the holes? LOL __________________ Duane Eiskant 1354 Stock/Super Stock

07-01-2010, 07:23 PM	#7
vic guilmino Senior Member Join Date: Dec 2001 Location: wv Posts: 884 Likes: 42 Liked 56 Times in 21 Posts	Re: New Holley replacment carb. where is this on the nhra page __________________ Vic Guilmino 1129 STK

07-02-2010, 09:07 AM	#8
LXguy Junior Member Join Date: Jun 2010 Location: Champaign, IL Posts: 40 Likes: 0 Liked 0 Times in 0 Posts	Re: New Holley replacment carb. So, just to clarify... I get to dig through junkpiles and Ebay looking for a one-year-only POS Rochester 2bbl, and then try to figure out how to make it work, and what I can and can't do to it, but there's some combination that can just call up Quickfuel and order up a new-tech brandy new aluminum carb? That seems pretty whack to me. I'm just sayin'. PS Not faulting Quickfuel, they make awesome stuff.

07-02-2010, 11:15 AM	#9
Bob Pagano VIP Member Join Date: Jun 2002 Location: New Holland, PA Mooresville,NC Posts: 1,163 Likes: 239 Liked 16 Times in 11 Posts	Re: New Holley replacment carb. LX you do know you do not need to run the right # carb dont you ? can be any # as long as it is the proper cfm and the throttle plates measures the same as original. __________________ Bob Pagano A/SA

07-02-2010, 12:55 PM	#10
LXguy Junior Member Join Date: Jun 2010 Location: Champaign, IL Posts: 40 Likes: 0 Liked 0 Times in 0 Posts	Re: New Holley replacment carb. Bob: I did not know that. Thanks! I'm sure that will make the task easier. Does NHRA have those measurements somewhere? Steve