Problem @ Orlando Speed World - Page 2

Ed Fernandez · 05-13-2012, 11:06 PM

Is it a warantee problem that any Dodge dealer can fix?:>):>):>)

40 more to go.

NWDragracing · 05-14-2012, 08:40 AM

It appears they are held in place with 3M body panel structural adhesive.

KRatcliff · 05-14-2012, 09:44 AM

Quote:

Originally Posted by Ed Fernandez

Is it a warantee problem that any Dodge dealer can fix?:>):>):>

It sure is, but there is no guarantee that the loaner will run the index.

Ed Fernandez · 05-14-2012, 09:53 AM

Quote:

Originally Posted by KRatcliff

It sure is, but there is no guarantee that the loaner will run the index.

The loaner is probably a new Dart.Or maybe one of those Fiat 500 tuna cans.

38 more to go.

C and W Racing · 05-14-2012, 10:12 AM

Quote:

Originally Posted by Jim Wahl

WOW Mack! Did it just fly off at speed? I also thought the hoods were one piece. The scoop looks like it was glued on! Any other damage to the paint any where else? Jim

.

The 08 Cobra Jet that I drive lost it's scoop (ironically at Orlando) going thru the finish line and yes, it bounced off of the roof and put a nice little dent in it. Thats why it now has a non painted scoop on it now. We got the replacement and didn't even bother painting it. Just bolted it on
Chuck

Jim Wahl · 05-14-2012, 10:22 AM

Quote:

Originally Posted by C and W Racing

The 08 Cobra Jet that I drive lost it's scoop (ironically at Orlando) going thru the finish line and yes, it bounced off of the roof and put a nice little dent in it. Thats why it now has a non painted scoop on it now. We got the replacement and didn't even bother painting it. Just bolted it on
Chuck

Chuck, did that happen at the SSSSA race? Jim

.

C and W Racing · 05-14-2012, 10:35 AM

Quote:

Originally Posted by Jim Wahl

Chuck, did that happen at the SSSSA race? Jim

.

No, it happened last year at a time we were part of a track rental and was testing
Chuck

Hemi Moose · 05-14-2012, 04:57 PM

...you would think the Chrysler engineers that designed the Drag Pak hood would not take the cheap way out when designing it...the old Challenger T/A hood was a one piece deal and the Shaker hood bubbles used on the old Challenger & Cudas were fiberglass units bolted together using threaded studs & nuts...or like the fake side scoops used on the other B-body Chargers, Superbees & Road Runners etc from back then..

600ci · 05-14-2012, 09:02 PM

My 08 CJ did the same thing at Orlando (ford sent me a new upgraded one under warranty)

Ron Ortiz · 05-17-2012, 03:37 PM

Mack, come by my pit area, we got gum, thumb tacks, string, some paper clips, a clothes pin, and some Elmer's glue. We can have her fixed in no time.

Ron Ortiz
U/SA I knew that stuff would come in handy.

05-13-2012, 11:06 PM	#11
Ed Fernandez Veteran Member Join Date: Nov 2001 Location: NOO JOISEY nexta NOO YAWK Posts: 5,879 Likes: 38 Liked 100 Times in 45 Posts	Re: Problem @ Orlando Speed World Is it a warantee problem that any Dodge dealer can fix?:>):>):>) 40 more to go. __________________ Former NHRA #1945 Former IHRA #1945 T/SA

05-14-2012, 08:40 AM	#12
NWDragracing Junior Member Join Date: Jan 2010 Posts: 40 Likes: 0 Liked 0 Times in 0 Posts	Re: Problem @ Orlando Speed World It appears they are held in place with 3M body panel structural adhesive.

05-14-2012, 04:57 PM	#18
Hemi Moose VIP Member Join Date: Jan 2010 Posts: 2,824 Likes: 0 Liked 12 Times in 12 Posts	Re: Problem @ Orlando Speed World ...you would think the Chrysler engineers that designed the Drag Pak hood would not take the cheap way out when designing it...the old Challenger T/A hood was a one piece deal and the Shaker hood bubbles used on the old Challenger & Cudas were fiberglass units bolted together using threaded studs & nuts...or like the fake side scoops used on the other B-body Chargers, Superbees & Road Runners etc from back then..

05-14-2012, 09:02 PM	#19
600ci Member Join Date: Mar 2012 Posts: 163 Likes: 5 Liked 3 Times in 1 Post	Re: Problem @ Orlando Speed World My 08 CJ did the same thing at Orlando (ford sent me a new upgraded one under warranty)

05-17-2012, 03:37 PM	#20
Ron Ortiz Senior Member Join Date: Feb 2002 Location: Englewood, Florida Posts: 989 Likes: 35 Liked 317 Times in 103 Posts	Re: Problem @ Orlando Speed World Mack, come by my pit area, we got gum, thumb tacks, string, some paper clips, a clothes pin, and some Elmer's glue. We can have her fixed in no time. Ron Ortiz U/SA I knew that stuff would come in handy. __________________ Ron Ortiz 2102 STK