Wade Owens Article in Engine Masters Magazine

Wade_Owens · 09-04-2012, 12:57 PM

Thanks guys. The article was a blast to do. Thanks to BES, Canton Products and Dean Oliver for all of the hard work.

Wade O

Jeff Lee · 09-04-2012, 11:20 PM

Wade, please review PM. Thanks.

Lynn A McCarty · 09-05-2012, 11:55 AM

Tony@BES is very proud of that little 283, but he is very secretive of other peoples combos! He wont say a word except it is very cool.

TinSoldier 3215 · 09-05-2012, 05:04 PM

Tony and the gang at bes know how to make horsepower!!! Tony's the man!!:d

JHeath · 09-05-2012, 08:02 PM

I bought that issue in Rockford,Il on sat@3:30, I may have to get another!!!!!, mine is nearly worn out!!!!!

joelster · 09-06-2012, 07:35 AM

Wade--in the one external picture of the engine, what are the hoses going from the valve cover to the fuel pump block-off plate? Are they to equalize pressure?

K Stubbs · 09-06-2012, 09:22 AM

Tony is a genius. No matter what brand or combo

Wade_Owens · 09-06-2012, 10:28 AM

Quote:

Originally Posted by joelster

Wade--in the one external picture of the engine, what are the hoses going from the valve cover to the fuel pump block-off plate? Are they to equalize pressure?

No, we were checking pan pressure. On that dyno session, we tested some different pan evac systems to see how much vacuum we could get and hold. The rubber hose that is t'd into the side hooks to the vacuum gauge on the dyno

Wade

Jim Wahl · 09-11-2012, 12:06 PM

Quote:

Originally Posted by joelster

Wade--in the one external picture of the engine, what are the hoses going from the valve cover to the fuel pump block-off plate? Are they to equalize pressure?

They go to a very small nitrous bottle. What other explanation can there be?

Wade is one of my Stock heros, one day I hope to see that car in person. Jim

09-04-2012, 12:57 PM	#1
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: Wade Owens Article in Engine Masters Magazine Thanks guys. The article was a blast to do. Thanks to BES, Canton Products and Dean Oliver for all of the hard work. Wade O

09-04-2012, 11:20 PM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Wade Owens Article in Engine Masters Magazine Wade, please review PM. Thanks. __________________ Jeff Lee 7494 D/S '70 AMX

09-05-2012, 11:55 AM	#3
Lynn A McCarty Member Join Date: Jun 2002 Location: Plainfield (INDY) Indiana Posts: 468 Likes: 1 Liked 3 Times in 3 Posts	Re: Wade Owens Article in Engine Masters Magazine Tony@BES is very proud of that little 283, but he is very secretive of other peoples combos! He wont say a word except it is very cool. __________________ Lynn A McCarty 3470 SS

09-05-2012, 05:04 PM	#4
TinSoldier 3215 Member Join Date: Jul 2009 Location: Bulington, Ky Posts: 359 Likes: 0 Liked 6 Times in 5 Posts	Re: Wade Owens Article in Engine Masters Magazine Tony and the gang at bes know how to make horsepower!!! Tony's the man!!:d

09-05-2012, 08:02 PM	#5
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 786 Likes: 2,876 Liked 370 Times in 101 Posts	Re: Wade Owens Article in Engine Masters Magazine I bought that issue in Rockford,Il on sat@3:30, I may have to get another!!!!!, mine is nearly worn out!!!!! __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"

09-06-2012, 07:35 AM	#6
joelster Member Join Date: Nov 2007 Location: Tonawanda, NY Posts: 106 Likes: 0 Liked 0 Times in 0 Posts	Re: Wade Owens Article in Engine Masters Magazine Wade--in the one external picture of the engine, what are the hoses going from the valve cover to the fuel pump block-off plate? Are they to equalize pressure?

09-06-2012, 09:22 AM	#7
K Stubbs Member Join Date: Aug 2008 Location: Benton, Arkansas Posts: 402 Likes: 0 Liked 20 Times in 3 Posts	Re: Wade Owens Article in Engine Masters Magazine Tony is a genius. No matter what brand or combo