Seat Belt Anchor Bolt Size 1998 Camaro

Rob Petrie E395 · 12-06-2012, 07:27 PM

In my notes I wrote down M12X1.75. But I would double check that with a bolt from the hardware store before you goto too much trouble making something. The other thing I might add is Simpson used to make a eye bolt for mounting seat belts. If you screw those in to where the original bolts go they will tighten up although the threads seem loose when you are threading them in. Then go on the back side and put a lock nut on them. The driveshaft tunnel side is easy to put the nut on. The door side you have to cut a small hole in the bottom with a hole saw in order to access it with a wrench and put the nut on. I like it this way because you can use the floor mount belts with the clips instead of the bolts. Then you dont have to take the seats out to change the belts every two years.

12-06-2012, 07:27 PM	#5
Rob Petrie E395 VIP Member Join Date: Dec 2007 Location: Woodlawn IL Posts: 1,092 Likes: 162 Liked 216 Times in 77 Posts	Re: Seat Belt Anchor Bolt Size 1998 Camaro In my notes I wrote down M12X1.75. But I would double check that with a bolt from the hardware store before you goto too much trouble making something. The other thing I might add is Simpson used to make a eye bolt for mounting seat belts. If you screw those in to where the original bolts go they will tighten up although the threads seem loose when you are threading them in. Then go on the back side and put a lock nut on them. The driveshaft tunnel side is easy to put the nut on. The door side you have to cut a small hole in the bottom with a hole saw in order to access it with a wrench and put the nut on. I like it this way because you can use the floor mount belts with the clips instead of the bolts. Then you dont have to take the seats out to change the belts every two years.