Low travel hydraulic stocker lifters

Mike Taylor 3601 · 07-19-2013, 08:14 AM

G Anderson,
That is the same method I use.
I say if you tighten your lash to .003 or .005 you'll see and improvement.

I use the in closing/ex opening (honda method)in case need explanation,intake is almost closed set the ex ex barely opens set the intake if engine is warm usaully start with setting ex valves,if you go through all ex or all in engine does'nt have to rotate alot if rotating by hand just make sure you rotate engine the direction it runs.
Mike Taylor 3601

07-19-2013, 08:14 AM	#3
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,380 Likes: 371 Liked 319 Times in 108 Posts	Re: Low travel hydraulic stocker lifters G Anderson, That is the same method I use. I say if you tighten your lash to .003 or .005 you'll see and improvement. I use the in closing/ex opening (honda method)in case need explanation,intake is almost closed set the ex ex barely opens set the intake if engine is warm usaully start with setting ex valves,if you go through all ex or all in engine does'nt have to rotate alot if rotating by hand just make sure you rotate engine the direction it runs. Mike Taylor 3601