You got to be kidding?

[IvanP]

So, anyway...back to the topic at hand, but slightly away from it...

The NHRA rulebook states that only cars equipped with an exhaust requiring a tether must adhere to the rule next year. What about motorcycles? I noticed a PSM racer lost part of it's exhaust well past half track during qualifying last week at the U.S. Nats.
Just wondering.

Ivan.

[1320racer]

Scott, if required, even I will be buying a pair from you.

[buzzinhalfdozen]

Originally Posted by 1320racer

Scott, if required, even I will be buying a pair from you.

To this, somebodies got a syndrome! Maybe such you're such a respected engine, chassis, oh hell everything expert he'll set you up with a sponsorship.

[Jeff Lee]

Originally Posted by CollectorTethers.com

Thought I would post these up for everyone to see. While you may or may not like the rule, price and or product we have had great response over the past two weekends at the race track (BG D3 Race and the US Nationals in INDY).

We spoke to a lot of people who had similar negative initial opinions and once they saw the product on the cars, how clean it looks and how simple it was had a 360 degree opinion.

We know you will have options, but if you choose to go with a tethering system, we hope you will choose Collector Tethers

Thanks,
Scott Lemen

Using these parts as a guideline, when you break down the parts it is $190 if bought separately and that does not include the tethers. And although I'm sure resourceful racers could price these parts out cheeper, it won't be that much cheaper.
Yes I'm sure there is a cheaper way but all-in-all, it bites but in kit form it's probably not horrible.

[Maverick]

I can see where these teathers are needed on some cars, then ones where the collector is hanging off of the collector, with no other support. I think these people need teathers. When we built my car, when it came to headers and collectors, we have a clamp around the collector or muffler which bolts to the frame. Adding a teather to my car is redundant. It is not going to provide any more safety. I wonder what will happen when a collector comes off, and is teathered on a car like a super comp dragster, and now it is swinging around in the air as the car is going down the strip. All the pictures of the above, I agree need teathers, if fact I thing they need to be double teathered, to make sure they stay on. This is only two hundred dollars, but here we go again, where some one build something to be light and gain a advantage, and we all have to pay. Steve Williams S/G

[Jim Caughlin]

It would seem to me that as 90% + of headers are under chassis and if a collector falls off, it pretty much just slides down the track. The obvious offender would be down swept dragster headers that exit in front of the slicks. Aren't we all being punished for a design that doesn't apply to most. Why not just specify that a tether is required if the collector protrudes out in front of the tire. Not going to win this argument but as a header fabricator who is going to have to suffer with this change, I'm thinking that this is a knee jerk response to an isolated incident.

Jim Caughlin
SS 6019

[boster]

1320 , not to bust anyone's balls my 2008 CJ ran 8.78@155 at 3510 lbs at the atco race in april 2013 . But to tell the truth Holbrooks CJ is the fastest in the country . That car can run 8.50 in east coast air at 3500lbs

[Bernie Cunningham]

Originally Posted by Jim Caughlin

It would seem to me that as 90% + of headers are under chassis and if a collector falls off, it pretty much just slides down the track. The obvious offender would be down swept dragster headers that exit in front of the slicks. Aren't we all being punished for a design that doesn't apply to most. Why not just specify that a tether is required if the collector protrudes out in front of the tire. Not going to win this argument but as a header fabricator who is going to have to suffer with this change, I'm thinking that this is a knee jerk response to an isolated incident.

Jim Caughlin
SS 6019

Jim,
I reckon ya got it right, except for the fact that it's an insurance 'Knee jerk' reaction, I think it comes from a cry-baby law suit that they cant handle. ie , gotta pay.
Let's face the facts, NHRA is broke and has been for the last 6-7 years. ( Bruce, chime in if ya want) !

What do ya do ? Ya gotta cut cost's and ya liabilities.

MR. Lawyer says there is a proven case for tethers on headers cause ONE person complained and made some quick cash and that set's the precedent, game over !

[Ed Fernandez]

Originally Posted by Maverick

I can see where these teathers are needed on some cars, then ones where the collector is hanging off of the collector, with no other support. I think these people need teathers. When we built my car, when it came to headers and collectors, we have a clamp around the collector or muffler which bolts to the frame. Adding a teather to my car is redundant. It is not going to provide any more safety. I wonder what will happen when a collector comes off, and is teathered on a car like a super comp dragster, and now it is swinging around in the air as the car is going down the strip. All the pictures of the above, I agree need teathers, if fact I thing they need to be double teathered, to make sure they stay on. This is only two hundred dollars, but here we go again, where some one build something to be light and gain a advantage, and we all have to pay. Steve Williams S/G

No problemo.Said manufacturerer will come out with a new product.The Tether- Teather.Think about it.And of course the boys in Glendora will get their vig on it.