1969 Chevelle 427 w Jerico. No traction

[Alan Roehrich]

Originally Posted by Biscayne

The lower control arms go slightly up hill at the front but not very much. Pretty close to level. What can u do to make them level? Running a ram clutch setup with adjustible pressure plate. Not sure what he has the base pressure set at.

The ideal situation is to have them run slightly down hill in the front. You can lower the rear ride height, and/or slightly modify the locating holes, check to see what you can do within the rules. Still need to know the attitude of the top bars, and how they are mounted at the back. As well as what springs are in the car. Has it been on a scale, or better yet, 4 scales, to determine what the weight distribution is?