Clutch sensor

John Nechiporchik · 01-19-2014, 06:19 PM

The old collar must be removed. Looking at a source ( Ruland) that makes a variety of sizes. Likely need to find one that is close ( ID and OD) and hone the ID or turn the OD to make it work. Needs to be 2.350 OD , 1.750 ID .

Sean Marconette · 01-20-2014, 12:32 AM

John,

It looks like Grainger and IBT has 1.75" ID in a 2 piece. But the OD is 2.75" But you need an OD of 2.38. The last one of the list is 1 5/8" ID and 2 3/8" OD. That might work if you can machine the ID to what you need.

Sean

http://www.grainger.com/product/RULA...UZ2?s_pp=false

https://www.shopibt.com/storefront/i...&itm_index=270

https://www.shopibt.com/storefront/i...&itm_index=292

John Nechiporchik · 01-20-2014, 02:41 PM

Thanks for your help Sean.
The Ruland line has an aluminum unit (SP-25-A) that is 2.375 OD (good) and 1.5625 ID that I can make work.
I got a few feelers out now to see if anyone has one already made up for this application. If I don't get lucky soon....I'll try the Ruland. The local Motion Industries store can get it for me in a few days....$18 for aluminum. Then I need to drill it for the magnets....get them from racepak...and hopefully be done with this project!!!!
PM me if you want to chat about this stick stuff. I'm on a learning curve and need all the help I can get!!

John

01-19-2014, 06:19 PM	#1
John Nechiporchik Member Join Date: Mar 2007 Location: Grosse Ile Mi. Posts: 316 Likes: 84 Liked 13 Times in 7 Posts	Re: Clutch sensor The old collar must be removed. Looking at a source ( Ruland) that makes a variety of sizes. Likely need to find one that is close ( ID and OD) and hone the ID or turn the OD to make it work. Needs to be 2.350 OD , 1.750 ID .

01-20-2014, 12:32 AM	#2
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 796 Liked 275 Times in 76 Posts	Re: Clutch sensor John, It looks like Grainger and IBT has 1.75" ID in a 2 piece. But the OD is 2.75" But you need an OD of 2.38. The last one of the list is 1 5/8" ID and 2 3/8" OD. That might work if you can machine the ID to what you need. Sean http://www.grainger.com/product/RULA...UZ2?s_pp=false https://www.shopibt.com/storefront/i...&itm_index=270 https://www.shopibt.com/storefront/i...&itm_index=292 __________________ Sean Marconette 84 Mustang 5060 SS/N

01-20-2014, 02:41 PM	#3
John Nechiporchik Member Join Date: Mar 2007 Location: Grosse Ile Mi. Posts: 316 Likes: 84 Liked 13 Times in 7 Posts	Re: Clutch sensor Thanks for your help Sean. The Ruland line has an aluminum unit (SP-25-A) that is 2.375 OD (good) and 1.5625 ID that I can make work. I got a few feelers out now to see if anyone has one already made up for this application. If I don't get lucky soon....I'll try the Ruland. The local Motion Industries store can get it for me in a few days....$18 for aluminum. Then I need to drill it for the magnets....get them from racepak...and hopefully be done with this project!!!! PM me if you want to chat about this stick stuff. I'm on a learning curve and need all the help I can get!! John