feedback about new drill bits

Andy Friar · 04-15-2021, 11:36 AM

High speed steel from Production Tool or a similar tool supply house. Brands are not as important as speed & pressure when drilling. if you have to push hard then your bit is dull and/or the material is too hard for general automotive stuff. Keep em sharp, use good oil while drilling and peck drill holes helps a lot. I have had good luck with Morse and Cleveland Twist drill both at work and at home in the past.

https://www.pts-tools.com/search#/catalogue/group/6901

04-15-2021, 11:36 AM	#3
Andy Friar Member Join Date: Aug 2013 Location: Howell, MI Posts: 250 Likes: 699 Liked 226 Times in 76 Posts	Re: feedback about new drill bits High speed steel from Production Tool or a similar tool supply house. Brands are not as important as speed & pressure when drilling. if you have to push hard then your bit is dull and/or the material is too hard for general automotive stuff. Keep em sharp, use good oil while drilling and peck drill holes helps a lot. I have had good luck with Morse and Cleveland Twist drill both at work and at home in the past. https://www.pts-tools.com/search#/catalogue/group/6901 __________________ Andy Friar