|
![]() |
#11 |
Member
Join Date: Aug 2010
Location: CT
Posts: 454
Likes: 1,767
Liked 345 Times in 149 Posts
|
![]()
At least swap them side for side, and see if it does the same thing again.
__________________
Phil Molski PMR Performance S/C 1623 |
![]() |
![]() |
Liked |
![]() |
#12 |
Member
Join Date: Sep 2013
Posts: 288
Likes: 38
Liked 354 Times in 118 Posts
|
![]()
While you are swapping them make sure they are equal pressure and measure the circumference. I had a pair on my TS car that was off a little and caused it to pull. Luckily they were close enough that 50 psi overnight cured the problem.
|
![]() |
![]() |
Liked |
![]() |
#13 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,656
Likes: 3,793
Liked 756 Times in 328 Posts
|
![]()
I would add, while initially the car would pull to the right, in the end it would make a right turn off the starting line.
It was the right slick, when running the car on jack stands the right slick had a little "run out" and the left tire ran true. I guess it was broken inside some how. Good luck and let us know what you find out. |
![]() |
![]() |
![]() |
#14 |
Junior Member
Join Date: Apr 2016
Location: Sapulpa, OK
Posts: 92
Likes: 124
Liked 168 Times in 30 Posts
|
![]()
Had a spring perch break away from the axle housing on the passenger side, caused a concern like this.
Repaired it & ran another 2 seasons with no concerns. The problem came back, the spring perch had broken part of the way & was binding the passenger spring. |
![]() |
![]() |
![]() |
|
|