Moser engineering axles, spool, hardware

Rory McNeil · 08-20-2021, 11:08 PM

When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price.

GTX JOHN · 08-21-2021, 12:18 AM

We run primarily Moser stuff in most of our dozen racers over
the years and have encountered Zero issues for 20+ years!

steven reynolds · 08-21-2021, 08:22 AM

I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

flash · 08-23-2021, 08:37 AM

Moser pays at div and nationals,strange only at nationals

Darrel Goheen · 08-23-2021, 11:28 PM

When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost!

Jeff Teuton · 08-25-2021, 05:51 PM

Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff

Rose Racing · 08-25-2021, 06:39 PM

Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.

08-20-2021, 11:08 PM	#1
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 316 Liked 1,103 Times in 301 Posts	Re: Moser engineering axles, spool, hardware When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price. __________________ NHRA 6390 STK M/S 85 Mustang

08-21-2021, 12:18 AM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,732 Likes: 2,797 Liked 2,478 Times in 697 Posts	Re: Moser engineering axles, spool, hardware We run primarily Moser stuff in most of our dozen racers over the years and have encountered Zero issues for 20+ years! __________________ John Irving 741 Stock 741 Super Stock

08-21-2021, 08:22 AM	#3
steven reynolds Junior Member Join Date: Jan 2009 Location: Missouri Posts: 45 Likes: 2,781 Liked 13 Times in 11 Posts	Re: Moser engineering axles, spool, hardware I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

08-23-2021, 08:37 AM	#4
flash Junior Member Join Date: Apr 2012 Posts: 89 Likes: 1 Liked 6 Times in 5 Posts	Re: Moser engineering axles, spool, hardware Moser pays at div and nationals,strange only at nationals

08-23-2021, 11:28 PM	#5
Darrel Goheen Member Join Date: Jan 2011 Location: Hays, KS Posts: 380 Likes: 226 Liked 70 Times in 31 Posts	Re: Moser engineering axles, spool, hardware When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost! __________________ Darrel Goheen 785-623-7021 Stock Eliminator 585 94 Camaro Z/28 LT1/ET 585 67 Chevelle 427 Tehnician for JustAnswer.com

08-25-2021, 05:51 PM	#6
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Moser engineering axles, spool, hardware Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff __________________ Jeff Teuton 4022 STK

08-25-2021, 06:39 PM	#7
Rose Racing Member Join Date: Jan 2012 Location: Sandusky, Ohio Posts: 353 Likes: 95 Liked 226 Times in 74 Posts	Re: Moser engineering axles, spool, hardware Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.